MacAttak
Newbie
Found a coolant leak on the chain case side heat exchanger in the tunnel. It is located right by the bracket that
the rear axle and skid frame mount into the tunnel. my question is what is the easiest way to fix this? remove the exchanger from the tunnel or try doing it right in place. Next question is what is the easiest way to drain coolant? All
help would be greatly appreciated.
the rear axle and skid frame mount into the tunnel. my question is what is the easiest way to fix this? remove the exchanger from the tunnel or try doing it right in place. Next question is what is the easiest way to drain coolant? All
help would be greatly appreciated.
APEX 06
TY 4 Stroke God
- Joined
- Apr 30, 2009
- Messages
- 4,016
- Reaction score
- 36
- Points
- 1,253
- Location
- Sheboygan, WI
- Website
- www.sheboyganyamaha.com
- Country
- USA
- Snowmobile
- 09 Nytro XTX, 08 Apex Mtx
A lot easier to remove it the crack will be under the mount weld it up and good to go. Just pull the hose off the radiator And drain it that way.
MacAttak
Newbie
Thanks for your help.
