5OHHH
Veteran
I only put 500-600 miles on my curve 4" carbides this on my nytro and they are shot, which carbides and what length are you running on ur nytro?I hate the Tuners .... Curves on everything I own. 3 Apex's, 2 Vipers and Nytro. I also run the slim jim dually in conjunction... awesome in all conditions.
larrypolaris
Expert
Has anyone used Berdstom triple points on their Curve's.
Thinking of trying them next season.
Thinking of trying them next season.
LM7800
Expert
If you have studs run 6" round bar, if you don't have studs you could run a 4" round bar. That all you need no special bars. I have had my curves on two nytro xtx and now they are on my second viper, best skis made!I only put 500-600 miles on my curve 4" carbides this on my nytro and they are shot, which carbides and what length are you running on ur nytro?
putz21
VIP Member
- Joined
- Apr 15, 2013
- Messages
- 643
- Location
- Tomahawk, WI
- Country
- USA
- Snowmobile
- '23 Sidewinder LTX LE w/EPS
‘19 Sidewinder LTX SE
Agree!!! 6" round bar works awesome on my sled with 144 studs.
- Joined
- Apr 13, 2003
- Messages
- 21,496
- Age
- 54
- Location
- Schofield, WI
- Website
- www.totallyamaha.com
- Country
- USA
- Snowmobile
- 2020 Sidewinder SRX
I run 6" slim Jim duallys.I only put 500-600 miles on my curve 4" carbides this on my nytro and they are shot, which carbides and what length are you running on ur nytro?
5OHHH
Veteran
Thanks for your input! I threw the stock skis back on last night with deuces (4.5") so i can ride one last time for the year before the warm weather and loved the no darting but pushed much more than the 4" single on the curves, those dually's push much on the curves?I run 6" slim Jim duallys.
TD Max
Lifetime Member
I run 6" slim Jim duallys.
I have a set of 6" slim jims here ready to install. Not enough snow to warrant wrecking a new set of duallys so I'm working with my toe first to see if I can get the Shapers to work better first. I'm also going to try the bite harder sharpener on my shapers to see of I can recover them.
- Joined
- Apr 13, 2003
- Messages
- 21,496
- Age
- 54
- Location
- Schofield, WI
- Website
- www.totallyamaha.com
- Country
- USA
- Snowmobile
- 2020 Sidewinder SRX
I love them. I don't think they push much until they loose quite a bit of their edge.Thanks for your input! I threw the stock skis back on last night with deuces (4.5") so i can ride one last time for the year before the warm weather and loved the no darting but pushed much more than the 4" single on the curves, those dually's push much on the curves?
DGZRT
VIP Member
- Joined
- Feb 23, 2006
- Messages
- 1,181
- Location
- Stevens Point Wisconsin
- Country
- USA
- Snowmobile
- 2008 Vector shorty, 17 Shitdoo 1200X, 2000- pullmyass-340 for Grandkids
I have a set of 6" slim jims here ready to install. Not enough snow to warrant wrecking a new set of duallys so I'm working with my toe first to see if I can get the Shapers to work better first. I'm also going to try the bite harder sharpener on my shapers to see of I can recover them.
You might try a half pipe mod. That's what some people call it. I run 6" shapers with this out front and find it works great. This is SLP's version that they sell.
trevorl1
Expert
- Joined
- Mar 14, 2015
- Messages
- 261
- Age
- 35
- Location
- Nova Scotia
- Country
- Canada
- Snowmobile
- 2014 sr viper xtx-se
Is that towards the back of the ski? I'm thinking of trying of making my own snow trackers with some stainless steel.
DGZRT
VIP Member
- Joined
- Feb 23, 2006
- Messages
- 1,181
- Location
- Stevens Point Wisconsin
- Country
- USA
- Snowmobile
- 2008 Vector shorty, 17 Shitdoo 1200X, 2000- pullmyass-340 for Grandkids
Under the front first bolt. I used 1.25" SS tubing cut in half and both ends rounded up mine are only 2.25" long and have one hole. I have a pair on my older 500 XTC that are 4.5" and have 2 bolts thru them. They have lasted 3000 miles and cost me nothing to make. just make sure you put the half pipe against the Keel then the skeg over them to hold in place and use lock tite on the bolt . no problems transitioning over rail road track or trailer lips.
DrVis1969
Veteran
- Joined
- Aug 25, 2014
- Messages
- 44
- Age
- 55
- Location
- Eastern Ontario
- Country
- Canada
- Snowmobile
- 2020 SIdewinder LTX-SE
I ditched the tuners and put curves with 6" round bars,, They were worth every penny, even with the Canadian exchange. They dart a little but nothing compared to the Rush I rode before my viper.
Janne339
TY 4 Stroke Junkie
I can't see any mounting hardware for the -14 Viper on the Curve website? Only -15 and the new Sidewinder?
What mounting hardware are you guys running in -14 Viper?
What mounting hardware are you guys running in -14 Viper?
hibshman25
Vendor
- Joined
- Sep 25, 2005
- Messages
- 2,865
- Age
- 40
- Location
- Lebanon, PA 17042
- Country
- USA
- Snowmobile
- 2017 sidewinder ltx dx
2018 snoscoot
I can't see any mounting hardware for the -14 Viper on the Curve website? Only -15 and the new Sidewinder?
What mounting hardware are you guys running in -14 Viper?
You can mount curve skis on on a 14 viper using all the stock ski hardware. One of the advantages of buying curve from me....you don't have to buy a hardware kit. I provide instructions on how to use stock hardware. Its very simple. I sell the leader kit which is black skis, black loops, and 4" runners. The kit lists for 380. I'm currently running a sale for TY members which is 15% off all online store orders. Sale is good til end of September. Send me a PM if interested.
-
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.