Jonathan Miller
Newbie
- Joined
- Dec 12, 2016
- Messages
- 5
- Reaction score
- 0
- Points
- 21
- Location
- inlet ny
- Country
- USA
- Snowmobile
- yamaha rx1
hey guys I had an oil line blow out and no lights came on and I felt a vibration and then here a squeal and it shut right down. I towed it back to my garage filled it back up with oil and put the line back on. It started up and then I shut it down and restarted it and the squeal went away but there's a knock. Always I was just wondering what kind of problems i am going to face , crank pistons, or whatever I know I won't know till I get in there but I'm just wondering what everyone thinks before I start this project and if maybe a new motor is in the picture? :/
Jonathan Miller
Newbie
- Joined
- Dec 12, 2016
- Messages
- 5
- Reaction score
- 0
- Points
- 21
- Location
- inlet ny
- Country
- USA
- Snowmobile
- yamaha rx1
Trying to post a video
yamahinn03
TY 4 Stroke Guru
- Joined
- Dec 28, 2004
- Messages
- 763
- Reaction score
- 107
- Points
- 1,078
- Location
- oshkosh, wi
- Country
- USA
- Snowmobile
- 18 Sidewinder (Wifes)
12 Nytro XTX (mine)
09Apex GT (?)
02 Viper (grass dragger)
Rod bearings for sure probly..
yamahinn03
TY 4 Stroke Guru
- Joined
- Dec 28, 2004
- Messages
- 763
- Reaction score
- 107
- Points
- 1,078
- Location
- oshkosh, wi
- Country
- USA
- Snowmobile
- 18 Sidewinder (Wifes)
12 Nytro XTX (mine)
09Apex GT (?)
02 Viper (grass dragger)
Had an 03 with bad oil line, thought was low on fuel when light came on but when I got to fuel it up oil was running out the bottom. Fixed the problem an less than 500 miles later she just stopped running.. Rod bearing failure.