For those than picked up an XTX

[marsh14]

Will it fit in a 10 foot clam shell trailer?

 

[Deadman]

thats gonna be damn close.

 

[marsh14]

Yamaha says it will fit. I was just wondering if anyone has had one in a 10 footer.

 

[Yamadooed]

Possible on a diagonal but my 136" had a 1/2" to spare on a 10' triton clam.

 

[Goddo]

I guess that depends on whether your clam shell is truly 10 feet inside. The specs show the overall length at 119.8 inches which would give you less than 1/2 to spare. However it also depends on how the length in measured. If it's measured to the end of the flap, then you should have tons of room.

I wish I could tell you...I guess that's why you are asking to see if anyone has done it.

 

[Nice Rumble]

I should know the answer to that question by the end of this month as my dealer has my XTX on a truck now. I'm thinking I may need to go to an 11 footer.

 

[marsh14]

I wish mine was. I just talked to my dealer and they just got in a couple vectors. No nytros yet.

 

[Yamadooed]

Measured out at 117" and the ski tips curled up the front so you could only open the rear...

 

[sledskiing]

It will also depend on what type of clamshell. I have a triton 12ft with top cap and my nytro MTX 162 fits but i have to have the sled in the perfect location or it hits the windshield. Also since i have a snorkle air intake coming out the back i have to rachet down the suspension so the back doesn't hit.

I've got it down pretty good and it's no problem but i had to initally close the shell with me in there to figure out where the sleds should be.

 

[tcona-AGT]

Measured mine from tip of ski handle to back of the bumper--120 3/4"

 

[Nice Rumble]

Measured mine from tip of ski handle to back of the bumper--120 3/4"

Well if your numbers are correct then it will fit in my trailer. I have 126" front to back.

 

[170plus]

mine fits but its tight with my Mission topper,when you lift the back to open top the snowflap catches on the inside lip of the topper,no big deal,i am wondering about the clearance with the mid height windshield cause there is only a few inches of from the stock shield to the topper,i can always take it off when i trailer the sleds cause i dont trailer them very often,more for storage for me

 

[yox185]

Mine fit in fine. I have a Triton, pulled it up till it just touched the lid. When the lid closes it moves away from the skis. Plenty of room, the only problem might be when opening the lid it might catch the flap.

 

[Nice Rumble]

A buddy of mine say's it will fit but just barely. He picked up his XTX and sent me this pic to show how tight it is.

No clearance for a taller windscreen.

 

[Reaper]

oh, off topic that Z06 looks tasty in the background....