1nc 2000
Lifetime Member Tim
- Joined
- Feb 26, 2010
- Messages
- 3,058
- Location
- Marquette, MI
- Country
- USA
- Snowmobile
- Yamaha FX Nytro RTX SE
Install bushings using a bolt with washers on both ends and a nut. Presses them in nice without damaging them.
Sledboy04
Extreme
Ulmer's are the way to go. Clean the A-Arms real good, chamfer the ends good and place the bushings in the freezer for about 30 min. then drop them in. Ran all last season and they're still just as tight as I first installed them.
eskimonytroxtx
Extreme
why in the freezer?
MOUNTY
Expert
The cold shrinks the metal.
whitedreamz
Newbie
Does anybody know the torq. spec for the bolts on a 09?
