Good handle bar riser for Apex MTX?

[BryanK410]

Hey I was wondering if anyone knew a good apex riser?
2" higher be perfect.

 

[MrSled]

I would go to http://www.lakeffectsnow.com/

 

[BryanK410]

Thanks, think I'll go with the 10" polished and black.

 

[MrSled]

Thanks, think I'll go with the 10" polished and black.

He makes some nice stuff.

 

[BryanK410]

Ordered now. Hopefully I wont have to mess with my cables if there is enough slack going from the stock 8" to 10".

 

[MrSled]

Ordered now. Hopefully I wont have to mess with my cables if there is enough slack going from the stock 8" to 10".

The only problem I had raising mine 2" was the throttle cable but I re routed it underneath and have had no issues.

 

[BryanK410]

Actually had to order the 3" pivot adapter with 7" risers. He was great to deal with and messaged me about what I needed. can't wait to get them.

 

[BryanK410]

Cable is just a bit too tight? Where to find some extra length re routing it or do I need a longer cable and if so where would I get that

 

[slowride06er]

Did you figure out the cables?

 

[Berg570]

Cable is just a bit too tight? Where to find some extra length re routing it or do I need a longer cable and if so where would I get that

I could not find any slack. I raised mine up just an inch, and that's all I could get. It was the brake line that ran out.

Rotating the bars slightly forward helped with the feel, somewhat.

 

[slowride06er]

The only problem I had raising mine 2" was the throttle cable but I re routed it underneath and have had no issues.

How do you route underneath?

 

[MrSled]

How do you route underneath?

If I remember correctly the cable goes over the bars then into the throttle block. I routed it under the bars into the throttle block.