Flipper
Expert
- Joined
- Oct 31, 2003
- Messages
- 332
- Reaction score
- 13
- Points
- 893
- Location
- Ottawa, ON
- Country
- Canada
- Snowmobile
- 2018 SideWinder LTX LE 50th
- LOCATION
- Ottawa
Back into sledding now after a few years absent. Have a 2018 LTX 50th.
I had no heated bars, thumb or power to my helmet visor during my first shake down ride. I traced the problem to a short in the factory installed heated visor plug. The positive voltage tab inside the plug is touching the plug body which is connected to ground.
With this condition the 20 Amp hand warmer fuse would blow as soon as I powered the sled on.
Took this visor connector out of the circuit and heated warmers are working fine. In fact I was pleasantly surprised at how fast they warmed up compared to my past Vectors.
If you don't have power to heated grips, thumb warmer or visor check out this plug.
Flipper.
I had no heated bars, thumb or power to my helmet visor during my first shake down ride. I traced the problem to a short in the factory installed heated visor plug. The positive voltage tab inside the plug is touching the plug body which is connected to ground.
With this condition the 20 Amp hand warmer fuse would blow as soon as I powered the sled on.
Took this visor connector out of the circuit and heated warmers are working fine. In fact I was pleasantly surprised at how fast they warmed up compared to my past Vectors.
If you don't have power to heated grips, thumb warmer or visor check out this plug.
Flipper.