Holtzman Kit on a Vector

[bsevigny]

I have a Holtzman kit coming for my Vector.

I plan on putting the bottle in the front like people do on the Apex.

Any suggestions on mounting points for nitrous/fuel valve (single-valve kit)?

Any suggestion on where to mount the nitrous nozzle (single 12g)?

Any suggestion on how to mount the fuel nozzles?

TY,

BGs

 

[NOS-PRO]

Did you buy the kit new? If you did the instructions are pretty clear.

If this is a used kit, let me know and I will help with installation thru pictures, email and over the phone if needed.

Terry

 

[bsevigny]

Vector

I look forward to the help!

I bought the kit used. It has a 12 gps AB-air box nozzle. I called straightlineperformance and they do not have Vector specific instructions according to Jason.

To get started, here a a few items:
Bottle. I plan on installing a 2.5 lb bottle in the noze by removing my toolbox. The bottle is a syphon type. This install will be similar to many Apex installations I have seen pictures of.

Fuel/Nitrous valve. I hope to find space in the noze also, but will not know for sure until I mount the bottle.

Fuel delivery: The kit I bought was from Phazer with EFI. straightlineperformance is sending me three nozzles appropriate for my low pressure carb/dual fuelpump setup. I am planning on installing the fuel nozzles in the carbs airbox stacks in front of the carbs.

Nitrous nozzle. My setup has a single 12 gps AB nozzle. My thought is getting this down by the air inlet on the airbox I will get the best broadcast to the three carbs. Any advice?

I plan on putting an arming switch on the dash, behind the steering post. My son sometimes rides with me and I want to ensure that the bottle valve is off and the device is electrically disarmed.

Thanks again!

Bgs