vmaxcrazy
Pro
Where are you putting your registration stickers on your Apex/Attack? I lost one of mine that I had on the belly pan down low. (DNR just gave me a warning) Is there something I can use to clean the pan with or do I have to get a plate and rivit it to it? Thanks, this site and the people have been really helpful. 
YamiSmurf
Expert
A friend put the registration directly on the belly pan while the sled was in a heated garage. Once he installed them to their location, he used a hair dryer to heat them (glue) up a little. He then went back over, pressing them while still warm. Both are still on and have been for 2K+ miles.
Hope this helps.
The positive side to the story is the replacement fee is only $5.00 not $22.00 for new stickers.
YS
Hope this helps.
The positive side to the story is the replacement fee is only $5.00 not $22.00 for new stickers.
YS
BlueBlood
Pro
The hair dryer trick works well, did that to my last three sleds and never lost one.
vmaxcrazy
Pro
Thanks guys, I'll sneak my wifes hair dryer out to the garage. 
Mighty
TY 4 Stroke God
- Joined
- Apr 17, 2003
- Messages
- 4,794
- Reaction score
- 224
- Points
- 1,453
- Location
- Grand Ledge Michigan USA!
- Country
- USA
- Snowmobile
- 22 Mach Z
23 Sidewinder SRX
I also suggest using something like a scrotch brite pad to rough up the area a little.
Len Todd
TY 4 Stroke God
Never had any luck keeping the sticker on the bellypan. Except for one seld, I have always had a spot on the hood. On that one, used a piece of shimstock attached to the bellypan with rivits. Then the sticker goes on the shimstock.
