My 2020 Yamaha SRX ... just the start

[MrSled]

Here she is so far!!

• Yamaha Sidewinder Bumper SMA-8LRFT-BU-BK
  
• Windshield 7939-688
• PowerMadd Sentinel Hand-guard with LED lights
• C&A Pro Skis with 8" DoubleDowns by SnowStuds.com
• Billet Riser 1" taller then stock
• 4th wheel kit by Sabrecat - www.jtatv.com
• Yamaha Windshield Bag - SMA-8LR21-00-BK
• Yamaha Knee Pads - SMA-8LR24-00-BK
• Billet 4 position spring blocks Yamaha SMA-8JP39-BL
• 192 Big Shots 1.075 Studs

Have to give a plug out to my stud Vendor and my Dealer!!

• SnowStuds.com- Tractions Products: Studs, Carbides and more...

• Port Yamaha, Port Washington WI - www.portyamaha.com Family owned since 1967, full service Yamaha dealer for vehicles, parts, accessories, and service located in Port Washington, WI

Here is the Pattern I am running and few pictures of them installed:

DoubleDown Carbides by SnowStuds

Forth Wheel Kit:

4 Position Yamaha suspension adjuster

 

[STAIN]

Is that a single ply track? I see the studs are for single ply. What stud length?
That is one good looking sled...…..

 

[stohlem]

Looks Great! Mike and Kevin good people at Port. Are wear bars a variation of Snowtrackers? What length studs?

 

[STAIN]

They look more like a Woody Slim Jim

 

[yamadoo]

Looks like a good, OK perfect start! Have fun

 

[MrSled]

Is that a single ply track? I see the studs are for single ply. What stud length?
That is one good looking sled...…..

shows in the picture. 1.075. 3/8 past lug. Stud guy thought with HP there would be less chance of pull through.

 

[MrSled]

They look more like a Woody Slim Jim

not at all. They are wider. Slim Jim is a channel not a side x aide bar.

 

[stevewithOCD]

It's BLACK!
I'm talkin' Wesley Snipes BLACK!
Not "White Me Can't Jump" Wesley Snipes, i'm talkin' bad #*$&@ "Blade" Wesley Snipes

Congrats MrBlade

 

[MrSled]

It's BLACK!
I'm talkin' Wesley Snipes BLACK!
Not "White Me Can't Jump" Wesley Snipes, i'm talkin' bad #*$&@ "Blade" Wesley Snipes

Congrats MrBlade

OMG you crack me up!!

 

[Turboflash]

1.0

shows in the picture. 1.075. 3/8 past lug. Stud guy thought with HP there would be less chance of pull through.

1.075" - .375" = .70". So, this sled has a .70 track on it?

 

[DMCTurbo]

Very nice!!!

 

[stevewithOCD]

Tom, did you put some kind of "blocker" programmer so i can't spell #*$&@ ?

 

[WinterWolf]

shows in the picture. 1.075. 3/8 past lug. Stud guy thought with HP there would be less chance of pull through.

Awesome looking Ride Mr. Sled, congratulations!!

Had a 06 Mach Z-X, came with a 1” Track, and I studded it with 192 1.175” Megabytes. Hooked great no issues/no pull throughs. Granted these Winders are at the next level no doubt, especially so when tuned, but you might find those 1.075’s are a tad short??

Let us know what you think once you get her on the snow if you would.

 

[87gtNOS]

1.0


1.075" - .375" = .70". So, this sled has a .70 track on it?

It appears he has cut the lugs down. I have a 144 Apex, and maybe my next track will be back to a 15" 1.25 or 1.38 lug and I will cut them down to 1". Have the 14x144x1 now. Cut down my original 06 Apex track, worked well.

Would like to hear from Tom as to how his works out on the SRXwinder.

 

[Turboflash]

Here she is so far!!

• Cat Windshield 7939-688
• PowerMadd Sentinel Hand-guard with LED lights
• C&A Pro Skis with 8" DoubleDowns by SnowStuds.com
• Billet Riser
• 4th wheel kit by Sabrecat - www.jtatv.com
• Windshield Bag
• Billet 4 position spring blocks.
• 192 Big Shots 1.075 Studs

View attachment 149667
View attachment 149668
View attachment 149669

Have to give a plug out to my stud Vendor and my Dealer!!

• SnowStuds.com- Tractions Products: Studs, Carbides and more...

• Port Yamaha, Port Washington WI - www.portyamaha.com Family owned since 1967, full service Yamaha dealer for vehicles, parts, accessories, and service located in Port Washington, WI

Here is the Pattern I am running and few pictures of them installed:

View attachment 149665
View attachment 149676

View attachment 149670
View attachment 149671
View attachment 149672
View attachment 149673
View attachment 149674
View attachment 149675


DoubleDown Carbides by SnowStuds

View attachment 149662
View attachment 149663
View attachment 149664


Forth Wheel Kit:

View attachment 149658
View attachment 149659
View attachment 149660
View attachment 149661

So will those hand guards work ok (not hit or interfere) with that windshield? I've been wanting something higher but was concerned that hand guards would hit the windshield when turning sharp.