Need a measurement please

[Nikolai]

Could someone with a Sidewinder Mountain please measure the clearance inbetween the top of the rear suspension front arm and the track?

And I’m 99% sure all the Sidewinders use 7-tooth 3” pitch drivers but please let me know if you have something else.

Thanks.

 

[Nikolai]

I’m looking for what the shortest distance is between the track any part of the front arm(might even be the shock mount).

I’m building a sled and want to know if I can lower the driveshaft 1/2” without the track rubbing anything.

 

[kennyspec]

Is the sidewinder the same tunnel as the viper? If so I could measure that on my viper for you.

 

[Nikolai]

The tunnels should be close but I just realized that the front arm has 2 holes and I jigged the lower hole. Which means if the front arm can go up then obviously the driveshaft can move down the same amount. So I don’t need a measurement, I can’t believe I didn’t think of this earlier.

 

[loudelectronics]

2018 plus have 8 tooth drivers.