2008 Nytro
Mpi Stage 1 at 9 psi
BOV
2:1 reg base set at 46psi
Fuel pump upgrade
800 feet
Will have after the 23 i have one now that is very very close but going to work on getting it SPOT on over the weekend!!!! With some great timming down low! With the two step set at 3,000 Rpm. Spinning 8950 WOT. We (me & Dave at HURRICANE) played with the Map Min. and Max. voltage and load % too!!Sled down low runs smooother than stock!!!
Skydog P.S. Looking like the injectors are going to be maxed with a base fuel psi of 46psi at 800 feet and 9 psi! Will let you guys know for sure in a few days!
Mpi Stage 1 at 9 psi
BOV
2:1 reg base set at 46psi
Fuel pump upgrade
800 feet
Will have after the 23 i have one now that is very very close but going to work on getting it SPOT on over the weekend!!!! With some great timming down low! With the two step set at 3,000 Rpm. Spinning 8950 WOT. We (me & Dave at HURRICANE) played with the Map Min. and Max. voltage and load % too!!Sled down low runs smooother than stock!!!
Skydog P.S. Looking like the injectors are going to be maxed with a base fuel psi of 46psi at 800 feet and 9 psi! Will let you guys know for sure in a few days!
lakercr
Tech Advisor
So, RB3 was a good choice then?!
OOOOOOO Yea buddy!! She ROCKS! Thank you!!
Matt
Matt
unlited
Veteran
- Joined
- Apr 19, 2015
- Messages
- 32
- Age
- 34
- Location
- Setermoen
- Country
- Norway
- Snowmobile
- Nytro MTX 163" 240 Turbo 2010
Nytro MTX 153" 190 Turbo 2013
Nytro MTX 153" Supercharged 240 hp 2012.
Do you have map to powercommander ? My nytro is supercharged , 10 psi, 31-23 spocket, Replaced injectors, fuel pump and regulator. Lowered ignition in the brain performed by MPI., but i need a map to the pcv? Can someone help me?
Similar threads
- Replies
- 8
- Views
- 1K
- Replies
- 17
- Views
- 3K
- Replies
- 7
- Views
- 3K