Phazer dude
Extreme
Hey I backed my sled off of the trailer when i got home after a day of riding and when I went to put it into drive the light just kept blinking and couldn't get it to engage. I tried rocking it forward, backward, side to side you name it. Can anybody help???
xt_gt
TY 4 Stroke Junkie
try pushing/pulling when your off the sled. just to get the track to move some more.
had the shim update for reverse done?
i think?
had the shim update for reverse done?
i think?
Clay350
Extreme
- Joined
- Oct 29, 2010
- Messages
- 64
- Reaction score
- 0
- Points
- 106
- Location
- Minneapolis (just moved here)
- Website
- www.treetopsmedia.com
What's the shim update?
xt_gt
TY 4 Stroke Junkie
i'm not sure.
if it goes somewhere on the secondary or inside the reverse housing by the gear.
maybe try a search for it. sorry, thats about all i know.
if it goes somewhere on the secondary or inside the reverse housing by the gear.
maybe try a search for it. sorry, thats about all i know.
07STI_Matt
Pro
i jump on the back of the tunnel (well a slight hop) or pick up on the rear bumper
rhino_live
Expert
ooooo when mine did this it was serious damage. there is an oiler in the chain case that feeds oil to your reverse gear.... what happened was mine leaked all chain case oil out and it caused the reverse gear to cease.... atleast that's how my mechanic put it into words. wasn't good.
09phazermichagan
Expert
sometimes less is more... prime example yay for the std 09 phaze 
17Rambler
Pro
Grab back end, lift sharply to get it into or out of reverse after hitting the buttons.
