linemech31
Pro
I have been looking for a power claw that will fit my xtx 144. Cant seem to find one do they make one that will fit. I am getting more into the off trail stuff and the ripsaw is getting me nowhere.
They don't make a 144 powder claw.
linemech31
Pro
not what i wanted to hear. What is my best choice for the 144skid ? I dont have any problems changing the drivers and getting rid of the tunnel guards.
natedawgedog
TY 4 Stroke Guru
- Joined
- Feb 5, 2011
- Messages
- 900
- Reaction score
- 32
- Points
- 608
- Location
- DLG, Ak
- Country
- USA
- Snowmobile
- something from 2019!
go with the 1.75 backcountry track, it is probably the best track for the xtx, it really doesnt trench much does great in the powder and awesome hookup on setup snow and trails
without much modifying you can get a 2" track under there but anything more than that you will have issues with driver/tunnel clearance unless you go with 7 or 8 tooth drivers...
without much modifying you can get a 2" track under there but anything more than that you will have issues with driver/tunnel clearance unless you go with 7 or 8 tooth drivers...
I really liked my 141 powerclaw, You would have to switch to 7 tooth 3" and remove your protectors but it would not be too tough to swap out. But if you want a more trail friendly track, the back country would probably be the best bet. I would not put on a lot of trail miles with a 2" or greater or it will show the abuse. But the 144x2 challanger was a very common track in its day and would not be a bad track either. Lots of options, not too many bad ones.
