gumbellion
Extreme
I have searched and come across a few threads on putting a hitch on a phazer, and the difficulties in it since there isn’t one made. And most of the internet searching hasn’t been overly helpful. But since most of what my sled does is go ice fishing I want to put a actual hitch on instead of playing the rope games that I did last season and being worried about the sleigh the whole time.
My sled has the bumper seen here
http://www.yamaha-motor.com/sport/acces ... etail.aspx
So what have you guys done or ideas do you have. I am guessing the easiest way would be to get a couple U-bolts and an aftermarket hitch that has bolt holes that are wider than the rear bumper tube and bolt it on. Any ideas of a hitch that meets that criteria?
Thanks
My sled has the bumper seen here
http://www.yamaha-motor.com/sport/acces ... etail.aspx
So what have you guys done or ideas do you have. I am guessing the easiest way would be to get a couple U-bolts and an aftermarket hitch that has bolt holes that are wider than the rear bumper tube and bolt it on. Any ideas of a hitch that meets that criteria?
Thanks
canadianhunter
TY 4 Stroke Junkie
This is one I made and have on both our sleds.
i used a denniskirk special from a 95 skidoo summit, its a flapper style hitch and is just long enough to tie into tunnel. I do have the stock mtx bumper tho.
justforfun
Veteran
Similar threads
- Replies
- 4
- Views
- 32K
- Replies
- 1
- Views
- 1K