stock 03 vrs mod 03

sledjunkyme

Veteran
Joined
Dec 15, 2005
Messages
34
Reaction score
0
Points
366
Location
north yarmouth maine
Just thought i would poast my experance with my 03 mods. I have two 03 rx1's did some mods on mine left wifes stock. before the mods hers would always pull mine by 4 to 6 lenth's down the lake from a deed stop and we would run equal top speed. in packed snow, we dont run studs for ice. I out weigh her by close to 100lb. So here is what i did put a ECP kit w/evac on a ripsaw 1.25 track and pionner clutch kit.and geared down 1 tooth. spent the after noon on the lake today. poor condictions with no studs, 6" of fresh corn snow non packing. on glair ice if you stoped could not even get moving sometimes. and the snow was vrey much drag for top speed. we packed a strip for a hour.and did roll ons from 40 mph. my mod sled would just pull away from her like 10 lenths or more, i could let her hit it jump out 5 lenths. and drive right past her no contest . the track had a lot to do with that. for speed runs at .5 mile. I ran both sleds by the radar gun first pass on mod sled 99mph first pas stock 88 second pass mod sled 98mph second pass stock 89 mph. Keep in mind that speed was limited by lots of drag corn snow that would never really pac. I am verry happy the mod sled has much better accelration and 10 mph on top This ecp kit rocks. I let my wife try mine and even she came back and said wow that thing is way more power. :Rockon: If your thinking ecp do it you will have a big smile going. and the pioner clutch kit works good with it. her stocker would turn 10,000 bottom to top mine goes right to 10,400 or 10,500 and hangs right there This is a big improvement over stock. The ECP is the first thing i haver installed and got advetised results with. she wants one now.
 
Thats about normal.. It made a huge difference on my warrior i had last year too..

It is the greatest mod you could ever do to the RX-1s

sledjunkyme Your wife must be a Bad A$$ rider to hold on to that sucker!! LOL
 


Back
Top