pdrmike
Lifetime Member
- Joined
- Dec 13, 2005
- Messages
- 154
- Reaction score
- 0
- Points
- 966
- Location
- Berlin, WI / Ontonagon,MI
- Country
- USA
- Snowmobile
- 12 APEX'S 09 Venture GT
On an 07 apex if you remove the inside rivet will it only affect the low end RPM and not affect top end at all? (weights have 3 rivets, inside, middle and tip) I am hitting about 9500-9700 RPM initially out of the hole and about 10500-10600 on top end. Just looking for a little more RPM on the hole shot. Thanks, Mike
LazyBastard
TY 4 Stroke God
- Joined
- Apr 13, 2003
- Messages
- 5,276
- Reaction score
- 5
- Points
- 1,216
No, they certainly overlap. What you might need to do is add some weight to the middle and/or tip as you take away from the inside.
Since you haven't got a huge amount of clutching experience, I suggest a set of aftermarket adjustable weights, like heavyhitters. These allow you to do all your trial and error adjustments without having to drill out rivets every time.
Since you haven't got a huge amount of clutching experience, I suggest a set of aftermarket adjustable weights, like heavyhitters. These allow you to do all your trial and error adjustments without having to drill out rivets every time.
