yamamarc
TY 4 Stroke God
- Joined
- Sep 29, 2013
- Messages
- 3,051
- Location
- Massey Ontario
- Country
- Canada
- Snowmobile
- 2019 zr9000 Ltd
Not a big list this year so far..lol
- installing
* yamaha jackshaft
*bdx driveshaft and skf bearings
*stm primary
*stm secondary
* header blanket( may send out header to have it ceramic coated as well)
* rebuild/valve qs3 shocks
*new brake rotor /pads
* slider, carbides and skf idler bearings
*main way solutions bell housing bushing (tighten steering free play)
* spark plugs
* empty and clean fuel tank and may swap fuel pump and regular
What are your plans for this season?
- installing
* yamaha jackshaft
*bdx driveshaft and skf bearings
*stm primary
*stm secondary
* header blanket( may send out header to have it ceramic coated as well)
* rebuild/valve qs3 shocks
*new brake rotor /pads
* slider, carbides and skf idler bearings
*main way solutions bell housing bushing (tighten steering free play)
* spark plugs
* empty and clean fuel tank and may swap fuel pump and regular
What are your plans for this season?
STAIN
Lifetime Member
- Joined
- Feb 29, 2004
- Messages
- 4,159
- Location
- Vermont
- Country
- USA
- Snowmobile
- 2022 SIDEWINDER LTX GT
- LOCATION
- Vermont
I would do a little research on that BDX shaft. I think a member here, Byam , had one and it did not end well.......
yamamarc
TY 4 Stroke God
- Joined
- Sep 29, 2013
- Messages
- 3,051
- Location
- Massey Ontario
- Country
- Canada
- Snowmobile
- 2019 zr9000 Ltd
This one is steelI would do a little research on that BDX shaft. I think a member here, Byam , had one and it did not end well.......
SidewinderConvert
4-Stroke Rookie
I am going to put in a new rip II 1.5 w/ 192 studs, rebuild/refresh shocks, tighten spacers behind throttle bodies, install custom heated visor/tether plug and snowtrackers on the pilot 6.9s.
Late last season I finally got clutching dialed in for my 260hp tune, I want to stay there for at least this season to make sure everything else is going to take the power/abuse well, then next season 3" exhaust and supporting mods to go to ~300hp.
Late last season I finally got clutching dialed in for my 260hp tune, I want to stay there for at least this season to make sure everything else is going to take the power/abuse well, then next season 3" exhaust and supporting mods to go to ~300hp.
DMCTurbo
VIP Member
- Joined
- Nov 12, 2005
- Messages
- 2,753
- Age
- 50
- Location
- Val Caron, Ontario
- Country
- Canada
- Snowmobile
- 2017 Sidewinder XTX LE 137
Stage 6, header, 3" intimidator exhaust, closed loop, fuel pump, regulator, wastegate upgrade & the usual maintenance.
yamamarc
TY 4 Stroke God
- Joined
- Sep 29, 2013
- Messages
- 3,051
- Location
- Massey Ontario
- Country
- Canada
- Snowmobile
- 2019 zr9000 Ltd
Holly.crap you didn't play around..Stage 6, header, 3" intimidator exhaust, closed loop, fuel pump, regulator, wastegate upgrade & the usual maintenance.
Nice! She's going to rock!!
DMCTurbo
VIP Member
- Joined
- Nov 12, 2005
- Messages
- 2,753
- Age
- 50
- Location
- Val Caron, Ontario
- Country
- Canada
- Snowmobile
- 2017 Sidewinder XTX LE 137
It better!Holly.crap you didn't play around..
Nice! She's going to rock!!
SumpBuster
TY 4 Stroke God
- Joined
- Jul 18, 2003
- Messages
- 2,353
- Location
- Carlisle, NY .
- Country
- USA
- Snowmobile
- 18 sidewinder; 06 Apex RTX
Nothing!
Sleds are ready year round. Grass on the dragstrip might be wet! lol
Sleds are ready year round. Grass on the dragstrip might be wet! lol
Fast
TY 4 Stroke Guru
- Joined
- Sep 25, 2018
- Messages
- 965
- Age
- 56
- Location
- Ontario
- Country
- Canada
- Snowmobile
- 2019 srx,2006 apex gt,96 storm hot to go
Hey Marc, i don't see the driveshaft wedge from Travis, it seems to be working for most of usNot a big list this year so far..lol
- installing
* yamaha jackshaft
*bdx driveshaft and skf bearings
*stm primary
*stm secondary
* header blanket( may send out header to have it ceramic coated as well)
* rebuild/valve qs3 shocks
*new brake rotor /pads
* slider, carbides and skf idler bearings
*main way solutions bell housing bushing (tighten steering free play)
* spark plugs
* empty and clean fuel tank and may swap fuel pump and regular
What are your plans for this season?
View attachment 162322View attachment 162323View attachment 162324
Fast
TY 4 Stroke Guru
- Joined
- Sep 25, 2018
- Messages
- 965
- Age
- 56
- Location
- Ontario
- Country
- Canada
- Snowmobile
- 2019 srx,2006 apex gt,96 storm hot to go
Looks like the only thing your missing is a srx wrapNot a big list this year so far..lol
- installing
* yamaha jackshaft
*bdx driveshaft and skf bearings
*stm primary
*stm secondary
* header blanket( may send out header to have it ceramic coated as well)
* rebuild/valve qs3 shocks
*new brake rotor /pads
* slider, carbides and skf idler bearings
*main way solutions bell housing bushing (tighten steering free play)
* spark plugs
* empty and clean fuel tank and may swap fuel pump and regular
What are your plans for this season?
View attachment 162322View attachment 162323View attachment 162324
WinderFab
TY 4 Stroke God
- Joined
- Mar 1, 2009
- Messages
- 1,861
- Age
- 46
- Location
- Woodbridge, ON
- Country
- Canada
- Snowmobile
- 2020 Sidewinder Ltx GT
Nice list of goodies there Marc but you forgot to mention finding my low boost issue lol..Not a big list this year so far..lol
- installing
* yamaha jackshaft
*bdx driveshaft and skf bearings
*stm primary
*stm secondary
* header blanket( may send out header to have it ceramic coated as well)
* rebuild/valve qs3 shocks
*new brake rotor /pads
* slider, carbides and skf idler bearings
*main way solutions bell housing bushing (tighten steering free play)
* spark plugs
* empty and clean fuel tank and may swap fuel pump and regular
What are your plans for this season?
View attachment 162322View attachment 162323View attachment 162324
yamamarc
TY 4 Stroke God
- Joined
- Sep 29, 2013
- Messages
- 3,051
- Location
- Massey Ontario
- Country
- Canada
- Snowmobile
- 2019 zr9000 Ltd
I didn't forget you hahahaha we will have it straighten out this fall buddyNice list of goodies there Marc but you forgot to mention finding my low boost issue lol..
yamamarc
TY 4 Stroke God
- Joined
- Sep 29, 2013
- Messages
- 3,051
- Location
- Massey Ontario
- Country
- Canada
- Snowmobile
- 2019 zr9000 Ltd
My bearing was locked with retaining compound since new and never had a issue.Hey Marc, i don't see the driveshaft wedge from Travis, it seems to be working for most of us
After riding home with a broken secondary last year everything was vibrating bad for 20km while limping it home. Decided to put a new driveshaft and bearing as precaution
yamamarc
TY 4 Stroke God
- Joined
- Sep 29, 2013
- Messages
- 3,051
- Location
- Massey Ontario
- Country
- Canada
- Snowmobile
- 2019 zr9000 Ltd
My bearing was locked with retaining compound since new and never had a issue.
After riding home with a broken secondary last year everything was vibrating bad for 20km while limping it home. Decided to put a new driveshaft and bearing as precaution.
yamamarc
TY 4 Stroke God
- Joined
- Sep 29, 2013
- Messages
- 3,051
- Location
- Massey Ontario
- Country
- Canada
- Snowmobile
- 2019 zr9000 Ltd
Could happen one day!Looks like the only thing your missing is a srx wrap
It would be a fun project come to think of it..lol
-
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.