Sledroll
TY 4 Stroke Master
- Joined
- Dec 19, 2005
- Messages
- 1,226
- Location
- Muskoka , Ontario
- Country
- Canada
- Snowmobile
- 2022 SRX LE
2017 SW LTX LE
Anyone had this happen while driving ?
Just happened on my 22 SRX and couldn't find the bag.
Are there ways to make this semi hard bag less likely to fall off ?
Just happened on my 22 SRX and couldn't find the bag.
Are there ways to make this semi hard bag less likely to fall off ?
IH8CROWS
Expert
Gorilla Tape. LOL
THEPASMAN
Expert
- Joined
- Mar 25, 2019
- Messages
- 448
- Age
- 57
- Location
- The Pas Manitoba
- Country
- Canada
- Snowmobile
- 2017 Sidewinder LTX LE
make sure the plastic nuts are turned till they click. Probably wasn’t installed right from the get go. They kinda turn to an over centre position
VX1R
Lifetime Member
- Joined
- Sep 19, 2004
- Messages
- 2,286
- Location
- Inver Grove Heights, MN
- Country
- USA
- Snowmobile
- Ordered: 2025 SW LTX-LE Final Edition
Current Riders:
2018 SW LTX-LE
2002 SRX Custom
Rough Trail: 2023 Lynx Xterrian 900TurboR
Vintage Riders:
1980 Enticer 300 Twin
1986 Inviter
1998 Phazer Mt. Lite
1996 Phazer Mt. Lite Mod
I never liked the quarter turn knobs and plastic nuts. I simply removed those parts and replaced with larger diameter fender washers/allen head bolts on the inside of the bag with washers/nuts under the tunnel. Simple, cheap, and totally secure way to keep the bag attached to the sled.
max rolph
Expert
- Joined
- Feb 10, 2021
- Messages
- 453
- Age
- 61
- Location
- horse shoe valley
- Country
- Canada
- Snowmobile
- 998 turbo
lol lost mine to this weekend in and around minising /orillia trails. mine was medium size
THEPASMAN
Expert
- Joined
- Mar 25, 2019
- Messages
- 448
- Age
- 57
- Location
- The Pas Manitoba
- Country
- Canada
- Snowmobile
- 2017 Sidewinder LTX LE
Maybe some Good Samaritan found it and will post it on Facebook lost and found
The bolt it down is a good idea unless you want to take it off regularly
Hopefully you get it back
The bolt it down is a good idea unless you want to take it off regularly
Hopefully you get it back
Confused
Lifetime Member
- Joined
- Oct 12, 2008
- Messages
- 448
- Location
- Mound, MN
- Country
- USA
- Snowmobile
- '25 Sidewinder SRX #723
'21 Sidewinder LTX SE
'24 MXZ 850 Turbo R Comp
'23 MXZ Blizzard 850 ETEC
'24 MXZ Neo+ 600
'88 SnoScoot
I thought one of the nuts was stripped until I noticed the post it was on was spinning. It's a pretty solid lock when tight and I find it hard to believe both would come out. Even then I'm surprised the bag popped up and fell out. I think mine is the medium bag which is a tight fit under the seat.
Sledroll
TY 4 Stroke Master
- Joined
- Dec 19, 2005
- Messages
- 1,226
- Location
- Muskoka , Ontario
- Country
- Canada
- Snowmobile
- 2022 SRX LE
2017 SW LTX LE
I believe when properly tightened down it is very secure as I rode 600 miles with it on .I thought one of the nuts was stripped until I noticed the post it was on was spinning. It's a pretty solid lock when tight and I find it hard to believe both would come out. Even then I'm surprised the bag popped up and fell out. I think mine is the medium bag which is a tight fit under the seat.
I believe it was removed and not refastened properly !
Not by me .
Confused
Lifetime Member
- Joined
- Oct 12, 2008
- Messages
- 448
- Location
- Mound, MN
- Country
- USA
- Snowmobile
- '25 Sidewinder SRX #723
'21 Sidewinder LTX SE
'24 MXZ 850 Turbo R Comp
'23 MXZ Blizzard 850 ETEC
'24 MXZ Neo+ 600
'88 SnoScoot
I believe when properly tightened down it is very secure as I rode 600 miles with it on .
I believe it was removed and not refastened properly !
Not by me .
Bummer, keep your eyes on the area Facebook pages. Maybe someone found it.
twyztid
VIP Member
- Joined
- Feb 14, 2011
- Messages
- 863
- Location
- Middleville, MI
- Country
- USA
- Snowmobile
- 2017 Sidewinder LTX SE - TD Power Trail, CAI, 3" Super Quiet
2012 RS Vector
2006 Apex GT
- LOCATION
- Middleville, MI
I didn't like the looks of the quarter-turn fasteners either so I assembled them off the sled and used some longer 10-32 screws with fender washers and lock nuts to secure it on.
SnowRipper
Newbie
- Joined
- Mar 15, 2021
- Messages
- 21
- Location
- Ottawa Ontario
- Country
- Canada
- Snowmobile
- 2022 SRX
- LOCATION
- Ottawa
Checked my 22 SRX bag after I read your post and sure enough one of the plastic nuts was completely off. Sorry for your lost bag but thanks for the heads up
max rolph
Expert
- Joined
- Feb 10, 2021
- Messages
- 453
- Age
- 61
- Location
- horse shoe valley
- Country
- Canada
- Snowmobile
- 998 turbo
Just got the new large bag back on today, the large bag now comes with the cams and short straps that go to the hole on the underside of rear bumper near tunnel.
Last edited:
cornet rt
Newbie
- Joined
- Sep 21, 2014
- Messages
- 23
- Age
- 52
- Country
- Canada
- Snowmobile
- Apex
My 2022 srx has metal lock nuts not going anyware
Sledroll
TY 4 Stroke Master
- Joined
- Dec 19, 2005
- Messages
- 1,226
- Location
- Muskoka , Ontario
- Country
- Canada
- Snowmobile
- 2022 SRX LE
2017 SW LTX LE
do you have a pic ?My 2022 srx has metal lock nuts not going anyware
max rolph
Expert
- Joined
- Feb 10, 2021
- Messages
- 453
- Age
- 61
- Location
- horse shoe valley
- Country
- Canada
- Snowmobile
- 998 turbo
ill send pics tonightdo you have a pic ?
Similar threads
- Replies
- 60
- Views
- 13K
-
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.