happy1426
Expert
more for canadian people as i believe you u.s guys use a sticker right??? Anyways im goin to put my new flap on tommorow of the new style and was wondering whether to drill holes in it or not??thanks also do you guys cut some of the new flap or just leave it alone???
cat hunter
TY 4 Stroke Junkie
I have mine on the rear flap but a lot of guys put them beside their left foot .
zeke
Extreme
plate
i put mine on the left side of the tunnel
i put mine on the left side of the tunnel
ApexerER
Expert
I wish we had plates here in NY instead of the stupid stickers. Then I could just rivit it to the madflap and be done with it.....


- Joined
- Mar 1, 2004
- Messages
- 4,868
- Reaction score
- 502
- Points
- 1,663
- Location
- WINTERPEG / MANITOBA / CANADA
ApexerER said:I wish we had plates here in NY instead of the stupid stickers. Then I could just rivit it to the madflap and be done with it.....
Really.....I would rather have a Sticker instead of that stupid plate

blackattak
Expert
My plate is screwed into the flap. 3 plastic licence plate screws with locking nuts I got at Crappy Tire. We have Off Road Enforcement Officers on our trails (when we eventually get enough snow). It needs to be visible on the back. I had it on the left side of the tunnel & my foot sometimes hid it & this was frowned upon. The way I have it attached the flap would have to come off to lose the plate. I trimmed my flap when I was studded as the studs would snag on it, now run the IceAttak track so that is no longer an issue but already trimmed.
ApexerER
Expert
BOUNTYHUNTER said:ApexerER said:I wish we had plates here in NY instead of the stupid stickers. Then I could just rivit it to the madflap and be done with it.....
Really.....I would rather have a Sticker instead of that stupid plate![]()
The stickers peel and there really isn't a good place to put them on the Apex. Riviting a plate to the back would be a perfect soulution as far as I am concerened. I guess you always want what you can't have.....


- Joined
- Mar 1, 2004
- Messages
- 4,868
- Reaction score
- 502
- Points
- 1,663
- Location
- WINTERPEG / MANITOBA / CANADA
ApexerER said:I guess you always want what you can't have.....
How True

I normally mount the plate on the top of the track extenion, but with a second heat exchanger there I can't mount it there.......I guess I'll try it on the rear snow flap like you guys


87gtNOS
VIP Member
- Joined
- Nov 30, 2005
- Messages
- 1,892
- Reaction score
- 74
- Points
- 1,108
- Location
- Toronto
- Country
- Canada
- Snowmobile
- 12 Apex XTX MCX powered
mine...
http://www.ty4stroke.com/viewtopic.php?t=36912&highlight=permit
note that the mount on the left side I removed....as it was pulling on the throttle cable.
And btw...the fun cops have never said anything about it....they see it as I approach them and proceed to wave me by, or ask for ownership, etc!
http://www.ty4stroke.com/viewtopic.php?t=36912&highlight=permit
note that the mount on the left side I removed....as it was pulling on the throttle cable.
And btw...the fun cops have never said anything about it....they see it as I approach them and proceed to wave me by, or ask for ownership, etc!


- Joined
- Mar 1, 2004
- Messages
- 4,868
- Reaction score
- 502
- Points
- 1,663
- Location
- WINTERPEG / MANITOBA / CANADA
87gtNOS said:mine...
http://www.ty4stroke.com/viewtopic.php?t=36912&highlight=permit
note that the mount on the left side I removed....as it was pulling on the throttle cable.
!
...Clever

In Sweden the licenceplate must be visible from the front.(If you want to be legal)
There is no place to put it so I made a plastic plate.
Drill two holes on it.(for fixingscrews)
Bent strongholds of strong wire to the two screws located between the meter and the windshield and then paste the sticker on it.
It works well if you have a clear windshield.
There is no place to put it so I made a plastic plate.
Drill two holes on it.(for fixingscrews)
Bent strongholds of strong wire to the two screws located between the meter and the windshield and then paste the sticker on it.
It works well if you have a clear windshield.
Attachments
charger0926
Pro
- Joined
- Sep 3, 2008
- Messages
- 197
- Reaction score
- 1
- Points
- 716
- Location
- Elk Grove, CA
- Country
- USA
- Snowmobile
- 2012 nitro mtx 162
Re: where do you guys mount your licence plate??????????????
Re: where do you guys mount your licence plate???????????????
on the back of my car
Re: where do you guys mount your licence plate???????????????
on the back of my car

Similar threads
- Replies
- 2
- Views
- 929
- Replies
- 11
- Views
- 2K
- Replies
- 0
- Views
- 329
-
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.