Will the cobra 1.3/ 54 pitch fit a 06 ATTAK? Should new drivers be put on? Any help would be great.
RIKMAN
Expert
were does your cobra come from?your attak drive sprockets are originally 2.52 of pitch. there is a 2.86 pitch single-ply available. 1.352 is the lug height.
Camoplast Cobra 136" Pitch is 54
LazyBastard
TY 4 Stroke God
If I'm not mistaken, you are specifying the pitch in metric units -- millimeters. In that case, it is actually SIXTY-four (64 mm), which is the same as 2.52 inches. From Charlotte, shouldn't you be talking in inches?? Either way, the answer is yes, it will fit.
http://www.camoplast.com/powersports/tracks/cobra.html
http://www.camoplast.com/powersports/tracks/cobra.html
catchmeifucan
Extreme
54 is not the pitch, it is number of lugs. Pitch is 2.52" (distance between each lug or center to center on your drivers). 54 lugs X 2.52" pitch = 136" track.
Just put a cobra 136 on mine. Watch out, Ski Doo takes a 137", which is a 2.86" pitch.
You want the 9061H track. Supposedly some of the earlier tracks were PACE 3, but the later ones were fully clipped.
Just put a cobra 136 on mine. Watch out, Ski Doo takes a 137", which is a 2.86" pitch.
You want the 9061H track. Supposedly some of the earlier tracks were PACE 3, but the later ones were fully clipped.