Search results

Getting ready to check chain case, going to pull oil tank and I don't see a gasket listed in Go Yamaha part. Is this just silicone used to seal it up?

"Please Enter Me in the Raffle"

Been ready this thread, anymore information on doing the mod with stock lights. Any over heating or melting problems?

2016 Viper

" Please Enter Me in the Raffle"

Thanks, got back together, works

I have 08 vector gt, need secondary clutch setting, I know this has been asked before, couldn't find anything on posts. The sled is all stock

finally got the big bear going after checking all of the wiring, it was the CDI box. $280 later.

yes it cranks with the electric start, I rechecked all of the wiring to the cdi, I have power going to the cdi and all of the wiring to the pickup and the coil all have continuity. I am down to it has to be the cdi box.

I have a big bear 400 no spark. shut off with key was running fine. now no spark I checked coil tested bad, replaced still no spark. checked cdi pickup it tests good. check wiring harness for short, check all the grounds. Is there anyway to check the CDI module?

I have my transfer rod off the replace the rear bearing on it, noticed it moves freely, is there support to be oil in the cylinder. If there what oil and how much?

I am changing jack shaft bearing (10,000 miles), does any know where to get an aftermarket bearing? I took the #s off original and got a bearing but not the same as Yamahas, the inside race is beveled on the original.

Just change them on my 2008, 6000 mile, they really make a rattleing sound under the tunnel.

check E-Bay i bought a manaul for my vector on dvd, $17.00

freinds needs help, just picked up 08 nytro it handles like poop,likes to go in straight line but comer like #*$&@, any suggestions.

I am starting to look for a kit for my Vector, does anyone out there already have one on there sled that works well?

I have a 08 vector, came from riding a polaris, I think the four stroke is a lot quieter motor and you here alot more of the track noise because of it.

I have 08 vector gt and I have heard other people complain about the hand warmer also, mine work fine. these warmer will not work at idle very well, once you get the rpms up they work. I ususallly turn them up on high to get them going, then have to turn down. I rode in Michigan on Jan 24 and it...

bought new off dealer floor in Nov 2008