Search results

I am also trying to determine if my sled is considered a 2009 model? It was manufactured on 8/08.

Thanks. Looks like I will wait until after the season and then send out all four shocks to be rebuilt.

I figured the same. I am going to wait until after the season and then send out all four shocks to get rebuilt at once. I think they have another season in them.

I have an 09 rs venture gt. It has 4600 miles. I know they need to be rebuilt. One front shock has a leak at the reservoir on top where the adjustment knob is. The oil leaks at the shaft were the knob is. It is slight and intermttant. Can i disassemble the shock at the shaft to maybe replace an...

The sled is back together. I installed the Berg triples 8" with the shims and ski savers it came with. I adjusted the toe out to 3/8". It was out to 3/4". I have a question on the leaking shock. There is a slight oil leak on the adj knob on the top of the shock at the reservoir. Can I remove...

Thanks for all the advice. After doing some extensive reading I decided and oredered the Bergstrom Triple carbides. Hopefully the last set I will need. I have some questiuons on the suspension. I am inspecting and adjusting the front and the rear. The front had a little oil near the reservoir...

I just looked up the Woody doolies dy6-6580. The reviews are good. I want to know if these are the ones you are referring to before I order. Thanks

You are right. I just read further into the carbides and i think i am going to get a quality set. My question is either 6" or 8". My track is not studded and i am heavy at 240 dressed plus the passenger. I will be riding on all trails.

I just installed all new bushings up front. I also installed the bulkhead saver kit. It was a chore to remove one of the outer lower a arm bolts . Took heat and alot of .hitting. The other lower bolt came out easy but had a little wave to it. I replaced both lower bolts from the dealer. Front...

I searched 100 times in many diff ways. Found one mention of pioneer performance. Searched that and got nothing. Just called Pioneer motorsports. They are no longer being made. They however have some old stock leftover I got a complete set for $115. Hopefully, I never have to change them...

That looks awewsome. I am having a hard time finding the nylatron bushings. I came across the oillites. The nylatrons look easier to install. By the way, my sled is fuel injected.

What are bulkhead bushings? When you say supplier do you mean the yamaha dealer?

That is what I read in my reasearch. I have another question. I jacked up the front end and it seem like alot of play in the a-arms. I took apart the a-arms and the bushings are intact. Not sure if it is suppose to be tight like on an atv. Maybe the plastic bushings are worn and is this common...

Hello all. I am new to the forum. I just picked up a 2009 yamaha rs venture gt with 4600 miles for $4450. It appears to be ridden gently. I just went through the sled. I changed the antifreeze,chain oil, spark plugs, adjusted track and greased the chassis. The previous owner had the oil changed...