Recent content by Decepticon Blackout

Zero shaft runout, spec deflection. Regrease and reseal. KOYO oem

no airbox mod, but a modified Hurricane fuel map 12.8-13.4 AFR

Bad secondary buttons - replaced w oem

very bad driveshaft bearing. replaced w modified KOYO

just a few driveline, bearing, Hindle pics

Anyone run mod cams in their n/a Nytro w a Hurrican Hindle setup?

Here's a blown set on an 09 XTX. New oem ones on the way.

Make sure the parts are Mikuni, not Chinese rip off clone stuff. A neighbour came over with his old Thundercat and wondered why it was pig rich all the way from mid to full. His "got these on eBay dirt cheap" needle jets/jet needles/mains" were 4 sizes too big. This clone stuff is making its...

Ask for a compression test, bent subfr.

Sounds close, my sweet spot is 8850-8900. It'll run to 99-100 w the gearing as is. The sled was owned by Shawn Elmhirst from Keane before I acquired it. He did it up pretty good. He was Yamaha's Snowcross guy for a bit. Let's hope the Sharbot Lake drags are still on by the end of RAP. I'd...

Thanks for your info shadow44. Looking fwd to this tour!

We'll see what happens BURG!

Well fellas, after not a lot of snow, but one killer poker run last month. We're loading up the sleds for the RAP TOUR (round Algonquin Park). The "Hurricane Nytro" with Dave's full Hindle/PC5/clutch kit will be put to the test again. It kicked #*$&@ on the poker run. Now we'll test it's...

agreed. love it on the Hurricane Nytro.