Recent content by firebird1158

Thanks!!

Is the bulb the same as the older apex?? H4 ?? thanks

Hey guys... have a 08 LTX 40th and asked dealer about a clutch upgrade and they suggested: SLP MTX weights 2 grams weight added/ blue-green spring TSS-04 secondary 58/44/34 and 58/46/36 helix red-pink spring I am hitting 10900 rpm in the 58/44/34 F setting on the twin helix.. They...

found it it was the spacer for the disk brake on the inside, it is not on the parts diagram though. only the collar that goes into the oil seal is on there! Anyway , glad to find it thanks for the help guys

tried both things, spacers on suspension are white plastic, and there is no room on the shaft after the collar with set screw then disk is put on, thanks for the help

Ok, have changed tracks before but had a couple of buddies trying to help and I can remember every part that came off and where it goes but a collar/spacer was in the parts bucket and I don't remember where it came from, I have assembled the thing 4 times now and double checked and can not find...

Dummy! Should have wired it to the battery like I told you!! lol lol

I wouldn't buy ice ripper, My buddy had pulled a few of the stud heads from the track and ended up just studding the track anyway worked great but it blew up yesterday. must have ripped on the outside with dbl backers and caught the tunnel protecter and just ripped half the track on the outside...

I hear that these tracks are awesome ,but I want to stud it. Would 1.50 studs clear the coolers, I know the 1.375 do but they are not really long enough for good traction. Gonna be running skidoo extroverts with looser track tension also Anybody have this setup with any problems?

thanks guys thanks guys, sounds right. I guess with xmas some people are away and not reading emails

I was wondering why I had not heard back from a few people about buying a new sled and then noticed that my messages are in my outbox and not sent. My sent and outboxes are not full at all , Can anybody help me out as to why, Thanks, I'm itching to get a new sled but will miss out on a...

165hp Some guys were saying that they are supposed to have 165hp stock?? Not sure what they changed, Maybe just the yamaha race ECU?? I'm curious to read some info on these.

Jet wells and float bowls?? What was the issue with the jet wells and float bowls??

Email Thanks allot guys, I got 60km on my 3 day trip this week before my rear bottom spring retainer broke and took out my piggy back line. Brand new shock rebuild gone to waste!!! Anyway not one of these $20 retainers in Canada, Tried every polaris dealer to see if they had an M-10 and ended...

Thanks allot This is exactly what I was looking for, I guess my shock was shot and they did a total rebuild. So i know I will have to adjust the settings as I was cranking my jack up to stiffin things as well as the crossover to compensate for the shock. If you could send the pre2000 manual...