Recent content by nitromator

Bought some fibreglass screen for a screen door and some spray adhesive. Removed the stock mesh and sprayed the adhesive on the top side a applied the screen. The adhesive held ok, wrapped some fishing line around the edges to help keep the screen in place. Installed back in the side covers...

Bought an analog multimeter today. Turned the heater on in the garage again. Pulled the rubber boots back from the connections behind the headlight. Disconnected both grip warmers (black-black) and thumb warmer (white-black). Checked resistance, approx 10 ohms for both grips and 50 ohms for...

Have not found the problem yet. Talked to the mechanic at the dealer, he thought it odd that both grips and the thumb warmer quit at the same time. Suggested checking for loose connection or moisture in connections, it may also be a problem with the ECU. I fired up the heater in the garage...

09 Nytro MTX, my grip and thumb warmers stopped working on my last ride. I checked fuses, connectors, and wires all looks ok. No apparent damage to the bars or grips either. Any ideas to what the problem might be?

I have an 09 Nytro MTX 153. Wondering if anyone has installed the Airframe running boards on this tunnel? Do they fit well? Are they stiff or does the tunnel flex when riding? Does the tunnel behind the running board need to be tapered like the stock 2010 - 13's? Does it need to be reinforced?

hi, thanks for the information. I'm pretty sure my problem is with the spring tension in the secondary clutch. I have the stock 'pink' spring installed. Will install the 'white' spring and increase the preload, hopefully that will improve the backshift. Now all I need is snow for testing.

I have an 09 Nitro MTX 153. Was having some problems in deep heavy snow last year, where I lost RPM while climbing. I think the secondary clutch was not backshifting fast enough or at all. Has anyone installed a roller secondary? Did that improve backshifting or would increasing spring...