Recent content by polarisconvert

My sled jus turn 6k miles on a U.P trip two weeks ago. We had a low of -7 with a high of 6 degrees. We also had a lot of snow on the ground and snowed 14" while we were there. On the third morning it started and was missing a little with a code 20 flashing. I looked up the code and it had to do...

Thank you, I didn't think to do that. I sold my 2005 to a friend. He was using starting fluid for the first start and got a little carried away. He is thankful it is just the air box

Is the 2003 Air box the same as the 2005?

Spoke with Alan Ulmer this morning about a clutch set up. He suggested a second option by using a Power Commander Wideband 2 Programmer. He said it would be a little more money but that he could bump up the rev limiter to 12k and not have to change the stock clutching. That would allow the sled...

The clutch set up is stock

It is a bone stock 2007 Attak that is studded I had a 2005 RX1 that had a lot of work done to it and this was just a spare sled. I sold the RX1 and started into looking at mods for this sled but did not want to spend that much money on an old sled. The nitrous kit came up for sale and I decided...

What adjustable clutch weights would you guys suggest. I would like to add some more nitrous but I am already at 11000 rpms on 30 hp. Thanks

I tried to simulate what it would feel like to run at 10100 but it seemed like I would feel a big difference in performance. Maybe that was not a good test. How much nitrous were you running? Did you run aftermarket weights? I think I could live with 10300 - 11100 RPMS

So I got out with my new to me Boondocker kit this week. I was on good hard pack trail when I raced my friend on his Sidewinder with a TD 250hp tune. I am only running 30 hp. I was shocked how hard it hit and pulled for 30 hp. Yes he did pass me and he should with 70 hp on me but it was not that...

I believe yours was supercharged? Did I see it up for sale? I have spent some time on jacked up turbo cats and it is very addictive. I would prefer a blower but not in the budget so this will have to do. :)

Hey everyone I bought a used kit from a guy that has had it on 3 different Apex's. He only ran it at the 30 hp pressure and he never had a problem with it and had a lot of fun. After fixing a few problems from a kit that old including needing a new bottle due to the valve being bad, I finally...

While looking on Straightline Performance 2.5 lb bottles it looks like the bottles and valve are the same as Boondockers. I sent them pics today of my valve. I should hear back tomorrow. I think there valves are the same. I will let you know

Hey guys I bought a used Boondocker kit. I went to have the bottle filled today and the valve is bad. Boondocker is not servicing the nitrous business any more. Can the valve be rebuilt or any idea as to were I can buy one? Any thing I did to know like does it have a dip tube? Thanks again

I am interested, please text me your number and I will call you, 989.277.573zero

Ok guys, I moved my ground from the engine to the chassis and no luck. Next I tried to power up the controller off of the red wire on the injector and nothing. I then unplugged all the connectors on the Boondocker harness and started looking to see if all the pins were the same height. I found...