Recent content by prowler1

I bought a 2007 MTX for my 13 year old boy. Problem is, that when the sled sits normally (with no rider on it) the rear springs are bottomed out on the teflon blocks. I read that you should have 10 to 15 mm of space between this teflon block and the arm (when rider is on the sled)? The cams...

I've got a 2007 MTX that my 13 year old boy rides. Been doing some research on the rear suspension. Problem is, that when the sled sits normally (without a rider) it bottoms out on the rear teflon spring blocks. I heard there should be 10-12 mm from this teflon block to the arm (when a rider...

AWESOME Thanks guys for all of your help! I managed to get it all apart, re-mount the air horns to the motor (which is no easy task) and put back together. Took it for a rip and seemed to go alright. Only thing now, it hesitates to launch when you're at idle and hammer the throttle?? It...

reply Gents, Are you talking about the 4 philips screws or are there actual hex nuts there somewhere? It still looks like everything is attached to the bottom of the air box. When I wiggle the air box the throttle linkages, other wires and hoses all wiggle as well as they are...

Boy was riding his 2007 Phazer MTX today and had a large stick go thru the A arms, past the plastic cover, and into the engine bay. Tried to start it but it had engine codes 14 and 26. Brought it home and pulled the front air box cover, all side panels off and had a look inside. The stick had...