Recent content by rossbaxt

is that the same as the idle speed control sEnsor? ( 3 screws mounted on top of the throttle bodies) Or is there another one?

Oh and I was thinking about adjusting my tps sensor angle to get it down to 16(middle of the tolerance) But I’ve read this can be tricky & could maby make it worse? With it the reading going between 18-19 think this is something I need to worry about?

Just picked up a 09 rtx a couple of days ago maby have put 20 kms on it. Motor is stock. First issue- on cold start up the idle is fine, once the sled starts warming up or at normal operating temps it idles around 1600rpm then will slowly drop to 1000-1200rpm it sounds like it’s going to stall...

Hey frostbite! What did you find was the problem? Was it the bearing? Just picked up a rtx making that loud unbearable braking sound..... I also have the walbros extrovert drivers...

I’ve got a stock 15viper motor with 180 mpi trail kit no afr gauges. Just plumbed in a cheap $30 boost gauge, and tied in bpv(was never hooked up). I also had to repair my broken waste gate mounts, and in process shortened the mount a bit. Also Noticed EABC wires frayed coming out of...

Did it help? My sleds doing the same thing.

Thanks kinger that’s good info

Hi guys, first time posting on here. Love this site, it’s helped me solve lots of problems! I’m new to the turbo world, it’s a big learning curve. i have 15 viper with the mpi trail kit I was trying to plumb in a boost gauge this weekend when I came across a series of problems 1. My bov was...