Turboflash's latest activity
-
**Yamaha Motor Announces Return to Snowmobile Market with Renewed Focus on 2-Stroke Engine Innovation** **April 1, 2026** **IWATA... -
It’s been awhile since the last update but here it is , crank, rods and pistons are installed , new bearings toleranced and installed...
-
Turboflash reacted to Fleecer's post in the thread Highest Speeds on Sidewinder/Thundercat with
Like.
TF, My other sled has closed loop and can add up to 125% or subtract 20%. Yes, when setting the FPR, you aim for 100% and let the... -
Turboflash reacted to KnappAttack's post in the thread Highest Speeds on Sidewinder/Thundercat with Like.
Jon, Bob has shared his logs with me and basically his sled is a freak out East like this, he also has hard parts on the machine the...
-
Turboflash replied to the thread Highest Speeds on Sidewinder/Thundercat.Just curious, your AFR is safe 11.8 but your fuel multiplier is 112.8 Just curious, on this log, your AFR is a safe 11.8 but your fuel...
-
Turboflash replied to the thread Hurricane turbo intake upgrade.I'm first in line, jk- lol. I contacted Hurricane 6-7 weeks ago after I found my first one. Wonder HOW he's taking care of it...
-
Don't waste your time, the only solution I see is to throw this POS in the garbage.
-
I'm working on a replacement for these, obviously I didn't make them originally but sold quite a few. I will offer them to customers...
-
The only way a comp 850 pulls a sidewinder is if the winder is running his boost tube. Lol
-
Turboflash replied to the thread Hurricane turbo intake upgrade.Agree. It's not a big deal from $ standpoint. To me, it's just another "knock out kit." It's the principle of the matter that...
-
Turboflash replied to the thread Hurricane turbo intake upgrade.May as well send pics. Maybe you'll get a response. I first sent mine about 6 weeks ago. So far, I know of 5-6 of these that have...
-
-
The rubber plug that holds the magnets can get hard and brittle over time, it doesn't want to hold the magnets anymore also. I believe...
-
Turboflash replied to the thread Watch your rubbers!.Yes, seen it and there were posts about this. Need to degrease it well and use some kind of gasket sealer when installing it. Thanks.
-
Take the Frogskinz off here Jon and just use Cat screen from the hardware store glued in from behind. You will actually have airflow...
