Recent content by xrider23

did you guy know how to adjust co in the diagnostic mode

yesterday i ran the sled in the street( in two inch of snow) for 10 minutes no problem until it reached 105 celsius, than the temp light came on. the sled stall by itself(i have to keep the thumb on the throttle to keep it running) I wait 10 minutes until it started again. Code 30 appear twice...

Someone know where to plug the vaccum hose for the fuel pressure regulator. I'm pretty sure it should hang cause the hose is cut ^ like this at the end

I removed the throttle body and checked in the cylinder when the intake valve open and i didn't see nothing wrong in the cylinder. no score and still see the criss cross pattern. The next thing i'm gonna try is to make it run next snow fall Throttle angle set to .67v Cable free play ok Maybe...

The next step will be to check if the piston scored the the liner cause lack of clearance And yes the shop did a a intake cam bore. I bought this cyl head on ebay and the intake was sticking

Need help boy...don't know what to do with this Let me explain you my problem Completly rebuilded my phazer engine after one of the two clip that hold the air filter in place pass through the throttle body and finish on the top of piston 1. I sleeved both cylinder with a cast iron sleeve...