Search results

Anyone running these skis. How do you like them ? do they dart. Heasvy steer effort ? HAve pilots with snowtrackers. Dont work with a crap. Worked better with jst 6" shaper How about curve vs stock ski with snow tracker ? Overwelmed with choices and dont want to waist unneccesary $$$...

YES HAVING THE LONGER TRACK WILL EFFECT THE PUSH. HAVE YOU TRIED SHORTNING FRONT LIMITER STRAP. yOU CAN GO 1 OR TWO HOLES SHORTER. AS WELL CHECK ADJUSTMENT OG TRANSFER ROD. tHE LESS TRANSFER THE BETTER THE FRONT SKI PRESSURE. MINE IS SET BETWEE MIN. AND THE HALF WAY POINT ON THEADJUSTING...

In Canada I would buy from Royal Distributing. They ship to the USA as well believe. Tried semi aggressive on a stock 2009 vector with stock skis yesterday and they rail. With aggressive should be perfect for me. Still have very light steering feel as well like the Pilots

Any one running these with comfort tuned suspension ? Any issues setting up suspension ? CURRENTLY RUNNING A 2006 APEX RTX AND LOOK FOR COUCH LIKE RIDE

dont put the snowtrackers on Pilots. Haven't had much luck with them. Putting stockers back on with trackers Will sell mine if interested. Tryed ever adjustment possible. Really push in corners. Dont seem to bite

x2 on full synthetic oil, will keep the cranking speed up for the cold statrs compared toa pertrolium based or semi synthetic oil' Works great for a diesel engine as well

Send it to Frank @ Shocktek just north of Guelph, Ont. He has great setup tried nd tested. I have your same sled. Best $200 spent. He has mods for front floats as well to stop body roll that he did. $200 was to rebuild front 2 Fox's and rebuild and revalve rear shock. No customs to deal with...

here is link to last years post http://www.ty4stroke.com/viewtopic.php? ... highlight=

There is a big posy on here somewhere following it through. Basically since they have no noise DB meters and there is no baseline for what is too loud. They just charge you under section 18.2 of "SNOW MOTOR VEHICLE ACT" which states "No person shall drive or permit to be driven any motorized...

Excell exhaust Have the Excell on my sled. Amazing sound. Sounds just like a street bike. No drone but on long trip it does get loud. At idle and nid RPM sounds very similar to stock exhaust, but at FT it really opens up. Had a noise ticket around Bracebridge from trail warden last year and...

Believe it was only $140 for extensions. Don't think the 128" track was any more money really than the 121. Had shocks revalved as well. For me it was worth it. Another upgrade for me

Left tunnel stock, it actually looks proper now. overall length remember is only 3.5 inches longer

Replaced track at 14,000 km as it was finished and started pulling studs every week. Bought some rail extensions from Tracks USA. With stretched skid also made more room so I was able to install extra wheels at rear of skid to save on lider wear

Go in between, stretched my apex to 128 with ice ripper track. Love it. Used to run a 136" viper and on fast twisties it was a work out to say the least

I WAS TOLD BY MY DEALER MCX WORKS WITH YAMAHA CLOSLY AND THEY HAVE HAD THIS SLED FOR A WHILE WORKING ON SOMETHING

12,000 MILES OR 20,000 KMS BELIEVE IT OR NOT AS PER MANUAL. I DO MINE EVERY OTHER YEAR FOR PIECE OF MIND

I have two of the exact same tires (Carlisle) 205x65x10 Thought they were the same tread and size are but one is a 3ply rated at 50psi and the other is a 4 ply rated at 90 psi My tires cup like this when they go low. One has a very slow leak over a couple pmonts it goes down. Done the...

RAP tour update Trails were amazing for late spring conditions. Hats off to all the clubs and volenteers that were still grooming for us. Was very surprised. First time around park for me. Beautiful riding Pembrook in town very shy on snow going to Hotel Pembrooke to Whitney, Groomed...

ANYONE DO THE RAP LAST WEEK, LOOKING TO LEAVE EARLY TOMMOROW AND DO IT 2 DAYS. cONDITIONS LOOK PRETTY GOOD EXCEPT HALIBURTON TO WHITNEY STILL SHOWING YELLOW ANYONE RIDE THERE LAST WEEK AND CAN UPDATE ME ON SNOW WOULD BE GREATLY APPRECIATED

Yamaha has bee suppling motors for these since 2009