Search results

when I install the new heater do I have to rewire it into the harness by cutting old one and crimping the new heater wires together?

I changed to Amsoil full synthetic and sled runs awesome.

where's the pilot screw? I can't find it on the carb. I've looked at the schematic and I also have teh service manual but cant find the pilot screw...?

thanks man! sounds like an easy fix. I was worried when it broke since this is my first sled I've ever owned and I'm definately learning a lot by the guys here on the site and working on the sled myself.

I stipped a screw on the bottom of the carb and while trying to get it off I broke one of the heater housings I believe. The heater spring from the Collar harness spring won't stay in. I use port yamaha for parts but I'm confused how to fix this one heater. Do I need to order an entire new...

when I lift the rear up and set it down the sled sinks a little which I know is normal but then if I gently push on the rear I can push the sled right down with little effort and it won't come back up on its own. Seams like there's not a lot of rear travel left. That's why I ask. and I only...

I have an '07 RS Nytro with about 900 miles on it. I've never jumped the sled and all the miles are trail riding. While working on the sled recently it seams like the rear is sagging more. I'm not sure if its just me thinking it looks lower or if there's something wrong with the rear shocks. How...

I just installed an Ulmer Stage 2 clutch kit on my RS Nytro two weeks ago. Hardest part was getting the belt off until I realized I didn't lock the track using the brake :o| Put the brake on, spin the clutch clockwise and the sheeves open and you slide the belt right off. Then you can add...

Port Yamaha. I've been from them and also local dealer. Port Yamaha has better prices by far compared to local dealership.

thanks Todd that helps me out a lot. I'll check everything this weekend while I work on it. Going to clean the carbs. Now I need to figure out what to do with the bad gas that's ben in the tank since the end of last season. I put sea foam in it but I really don't want to put it into my car...

when you did your carbs this way and you take the floats off do any parts fall out?...was thinking about trying this but worried I'd lose something down into the engine bay.

thanks guys. Ill go to a local dealer for the shims and also buy another belt just to be safe.

I installed a clutch kit and works great. I think I need to put in some spacers. The belt sits exactly 1.5 mm below the edge. Is it possible to stretch the belt while trying to get it off the clutch? I know it was seated a little lower before but it seams like its even more so now after I...

'07 Nytro and top was 110 non gps and I weigh 160 lbs. I'll check this year with a gps and a few performance mods.

is the paint specific for plastics?

I noticed that if I gently push down on the track so it's not touching the small wheels and try and spin them there seams like a lot of resistance and they dont spin like I thought they would. Shouldn't they spin freely? This is why I'm considering new wheels. They won't even do one full...

what's the factory idler wheel size for RS sleds? There's so many different idler wheel sizes and I can't find the size that's on there now. Whats the largest you can run on hte back withought other modifications? Thinking about getting the slydog bogies.

What are you guys using? I did a search and didn't come up with much. Local stores here are: Advance Auto parts, NAPA...not sure where else to look. I could go to the local dealer in my town but I'm not to fond of them and I actually went about an hour away to a different dealer to buy my sled...

I thought about it but aren't those tracks expensive? I'm looking for something a little cheaper and not to extememe. I just don't want to roll my sled or slide off the trail and fall 50 feet hitting trees on the way down. I only have 900 miles on my current track so its in new shape. I'll...

thanks Boomer. I'll definitely keep in touch. I'm also looking for more guys/woman to ride with Locally. I don't know much of the trails around here and ride with just one other guy and his daughter whose my age...I'll be 28 in November. I've only been south of Auburn on the trail that's around...