Search results

Hi there jaydaniels! Thanks for sharing your experience. One thing I wonder is if it is possible to overtighten the chain by using your method? In another thread I read the the valvecover has a chain guide that prevents the chain from skipping. But when you check the valve clearance and...

Thanks for the replies! I will be replacing the valve stem seals, I was also thinking about putting the valves in a lathe to check for runout and now that you guys mention it I will do it for sure. I don`t now the runout-limits but I hope this is written in the manual. Removing the valve...

Hi guys! Dimebag and I will soon be starting to assemble his Nytro engine after a rodbearing went bad. 2008 engine with 12.000km on it, 10.000 of them with MCX 180 turbo kit installed. In that matter I want to make sure that we don`t forget anything, I do work as an engine mechanic and have...

Hmm well actually I tend to fire it up as soon as I`m ready. Maybe the trick is to wait a few mins so that the oil can flow back into the oilpan?

Hmm this was interesting! I will soon be putting together a Nytro motor for the first time and I am glad a came across this thread. I have been doing valve jobs on motorcycles (removing cams to change shims), changed cam chain tensioners and and also installed manual ones. But I have...

Hi! Sometimes when I roll my Nytro and fire it up again, there is air in the oilpump and it takes a few seconds before the oilpressure is back. Sometimes it has stopped by itself but normally the pressure is back fast. It seems like blipping the throttle carefully makes it come back faster...

This sucks dimebag, but the good thing is that you can use the old crank as a decoration in your livingroom. Every morning you wakpe up and walk past it you will remember all the good times it gave you. Since I know your riding style I honestly have to say that it is incredible that it has...

Hi guys! On the last ride my track started to ratchet alot. It has happened one time before but that was on really wet and heavy snow. Now it slips imediately when I pin it in deep snow. I took the sled to the garage and found out that the track was loose (as expected), I kinda knew it was...

Hi guys! On my pre season tuneup I figured out it was a good idea to check the air pressure in the shocks and in that matter I`d like to know what pressure you guys are running in your rear shocks? Does somebody know what the stock pressure is? Would be cool if someone could say a few...

Hi there guys! Been a while since my last visit in this thread, good reading:) I noticed the shim/nut behind you had behind the oiltank, I did not put a shim there when I mounted my kit. Maybe I should check the oiltank for rub through =P. Hmmf

Hi guys! Wow radianguy, you had some heavy rock action going on there!! Must have really felt it when it hit.. .Your story is the opposite of pro116 and Mazz, I can see that the reinforcement plate on my frame (the plate that old frames didnt have?) is "bent" so I think the frame is bent...

Hi guys! On the last ride of last season I hit a rock with the left ski and now the ski is about 40mm further back then the right one. The sled is a 2011 MTX 162 with the MCX 180kit. Normally I would think that the only thing being bent is the A arms but from what I`ve heard the...

Hi ! Thanks for the replies:) Now I know that its nothing to worry about. I do have the OFT rollover valve installed. I think this was just a one-time incident or atleast rare incident cause I have been laying the sled on the side "thousands" of times with the throttle pinned and it...

Hi! Went for a "last ride of the season" this Saturday together with a friend on a doo. Some places the snow was hard, in one occation I tried to boondock and the snow was too hard and I tipped the sled over on the side, it took a couple of seconds before I shut it off because I thought I was...

Call Erik and ask him, no one knows it better then him :)

I installed the MCX 180 myself on my Nytro and I am 110% satisfied. Been riding 300kms with the turbo now and everything has worked perfect. Great throttle response, awesome power and amazing sound. Some friends of mine has the same kit and have ridden thousands of kms and no problems. MCX...

Here`s some pictures from today, great spring riding:) (Think they turned out OK so they are probably the best shots of this year) Me Nytro MCX 180 leads the way for the riderbackwards 2011 M8 My friend with the old V-Max 4 750 (that I rebuilt, for those who remember) rode together...

Awesome videos!! Isnt this thunderstruck material ? =P This might be a very dumb question, but is there a chance in hell I might make it up in one of them chutes with my Nytro MCX 180 162" ? =)

Also, one of the nuts are links! Cant remember which of them was what..

I remember having the same issue when I installed my relocator, but I was able to get the nuts loosened with a normal "key" (dont know the english word ). However I also remebered that I missed my crowfoot sockets which would have been perfect for loosening those nuts. (had them in another...