Search results

:) :) :)

What part is adjustable? The noise? I love that sound

My 22 XTX came in the lower hole also. I inquired to my dealer and this is what he said.

What are the characteristics if you go to far and put to much twist on the secondary spring Thanks In advance

Makes my blood boil that you can even buy one

I’ve run a 1.75 backcountry on my 2017 ltx . It’s currently has about 10,000 miles on it. It’s held up real well. The only complaint I can come up with is that it creates quite a howl at higher speeds. I’ve heard the same thing about the hurricane but don’t know first hand. Traction off trail is...

Just curious how did that happen

Is it possible that your shock is frozen limiting travel. Find a pail of hot water and pour it slowly on rear shock with sled tipped on its side If not that I would think your shock needs work

Keep adjusting them. When they are dialed in they are truly amazing. IMHO

I think I know what you mean but could you clarify what you do with the ABS pipe Sleeve inside the coils ???

Put strawberry jam on its toast

I’ve been using the powermadd ones from country cat they fit with no mods I couldn’t bring my self to pay $80 for just the matching sticker

I use the yamaha rail mounted with great success. Have for years they are reasonably priced easy to mount. Only down side to them they don’t like reverse very much. They only bend back a few times and then they break off They are easy to mount is why I like them and very effective in...

I have an LTX XTX and an MTX the skid I ordered from country cat will fit in all three if I measured correctly the MTX tunnel is about 3” longer than the XTX. I didn’t measure the LTX it’s Likely a couple shorter Would the 129 not be the same tunnel as the LTx ?? I know for a fact that...

With a low windshield you could go right under Yikes

Not at all Kinda embarrassing to post a vague post like I did previously that helped no one There are lots of hacks to be learned on this site. Very valuable asset when one has the desire to make something that pretty awesome even better

Do you have a part number for the braces? I added the UPT bracket as well, so thinking I should be the braces before I load up the gas caddy :) The BOP braces are very good. I went with a BDX rear bumper in conjunction with the internal braces there a bit pricey but look real good painted to...

Just read my post. I wasn’t very clear i rerouted the rollover exit hose from the air filter area are ( I have CAI that made this sound even louder ) to the 1/2” fitting over by the turbo. I believe it’s the fitting the earlier models used for the roll over valve

On my 22 xtx le wasn’t happy with the bottoming out as the centre shock was just a standard crap shock. I put in a heavier spring I got off kijji can’t remember if it was a zbros or a stingray it was better but still not what I wanted. And yes it was prone to lifting skis. I put an Elka stage 5...

Did that skid come complete with the qs3 rear shock