Search results

Do you blame them. ;)!

Anyone. I know they run them on snowX machines.

Unplug your heaters and see if your problem disappears.

Is it possible to run a backcountry with studs. Stock drivers and protectors removed. I have a deal thats to good to turn down

Is anyone running studs in there BC. I can get a good deal on a BC that is from a snowcross sled with no miles. I have stock drivers as far as I know. How can I verify if I have stock drivers. 3rd owner I've never heard of anyone having problems with a track that has been cut done. BC...

Thanks I'll do that

I just installed a set of apex bars with the 90 degree bar ends. They are crazy hot. I keep them at 3 bars and they are plenty warm. Now I can take off the Dumbo ears. The best $25 I've spent on my Nytro

The thing is my sled was not hot or low on oil. I took to a buddies heated shop and left it there over night to melt all the snow. I noticed my RB3 was covered in snow. I'm going to make some vent screens to keep the snow out. It is running perfect now. I think snow and ice got where it should...

I was riding tonight and I stopped to check my milage. As I looked down my oil light, coolant light came on along with an ER -01. I turned the machine off and re-started it and nothing. I started to move again and the codes came back. Turned it off and looked for leaks. Everything looked fine...

Thats a really good idea

Anyone know where to get pet screen

Where do you get pet screen. Is that the screen on patio doors or something different

I had the same problem today. We stopped for lunch and it would not start the first try. Started 3rd try and is working perfect ever since. It was minus 30 out

We just finished putting mine back together today. For some reason we had a really hard time putting the skid back in. I'm going to have to set-up my suspension again. Its out to lunch.

I finally pulled the shock. It should be done in a couple days. My back and knees could not take anymore I was going through some of the receipts from the previous owner and I found one for revalving at Pioneer performance.

I added 1.5 grams of wieght to the tip and now I'm revving 86-8700 off the bottle. The machine seemed to pull alot harder before, but its was hard to tell with all the fresh powder. I went to hit the button with the bottle off to see how rich my afr would be and no change. Somehow my fuel...

How come no one puts the filters right on the throttle bodies.

That sucks. I was going to try and do a 3 nossle set-up, but it was going to cost too much. To bad it did not work-out. It looked great.

I noticed your fuel pressure gauge only goes to 15 psi. What is the stock fuel pressure. I thought it was much higher then that.

The sled was clutched for the mods before I got it. The previous owner had big plans but he sold the sled before he got a chance to complete it.