Search results

In the directions it says to hold on to the stock header gasket because it will be used with the new header but my question is then why does it come with a new gasket? Do I use the stock gasket or the one that comes with the kit? (this is the gasket between the motor and the header not the...

Im doing both.. I bought everything to do the 2016 update and still got the better FAG bearings.

Yes I would just send out the rear shocks, it was the best mod I did to my 2014 LTX just because the 14s came so stiff. But I would recommend either Monster Performance or cannondale27 for the revalve, me personally I went with Monster performance but many people on here went with cannondale and...

I just ordered the BDX lightweight break disc. I don't really see that it will have a drastic difference over stock but for $50 why not haha. http://www.bd-xtreme.com/index.php?id_product=31&controller=product

Cannondale would you recommend upgrading to the 2016 setup or would you just replace the bearings with the good ones Mr Sled found? Im going to go through all of my bearing this year and if its worth it to change out to the 2016 setup i'm already going to be in there so why not.

Not a xtx but this is my ltx. I vote for mountain addiction. Sent from my iPhone using Tapatalk

I really like that wrap! where did you get it?

I have the quiet muffler on my hurricane turbo. It is just as quiet as stock so there is no worries about wardens. But if it was up to me I would have it straight piped hahaha. Here is my sled with the quiet muffler Sent from my iPhone using Tapatalk

Ok I really like that you have a bolt to screw in to take off the belt! Will this work on vipers? When will it be available to order online? Price?

I'm surprised to hear that, from what I have read the couple people that have done it on here they really like it. Did you have them just do the rev limit raise? or was it the full re flash? I was really considering this but if its a waist of money maybe not.

I really like my Innovate MTX setup with the osp gauge mount. The both show decimal values too. Sent from my iPhone using Tapatalk

We traded the Chevy in for a new ram last July! It's a 2015 ram 1500 5.7 hemi. New this year I did a 2" lift with 35" Toyo RTs on 18" fuel Mavericks. Sent from my iPhone using Tapatalk

I bought these last summer when I changed gears and my track they worked great! http://www.amazon.com/Lisle-44900-Lock-Ring-Plier/dp/B0009OR974?ie=UTF8&psc=1&redirect=true&ref_=oh_aui_detailpage_o00_s00

I have sentinels with mirrors and they are awesome! My dad liked them so much he bought some for his. I have since gone to there newer style mirror and it looks a lot better than the old antennas in my last pic Sent from my iPhone using Tapatalk

My dads and myn does it two... It's the sway bar bushings. I usually just try to cram some red grease in there and it usually keeps it at bay for 100 miles then it comes back.... Sent from my iPhone using Tapatalk

Just crimp and seal connectors. I really like it because when u take your hood off you don't have to unplug anything.

On my 2014 ltx I have the rear skid re valved(huge improvement should be your first mod), 1.6 ice cobra and SLP MoHawks with 6" round bar. Absolutely love this setup. The Skis rail with zero push ever. I say I have Medium steering effort, its not like power steering easy but its not arm pump...

Here's my setup. I just tapped into the 12v plug on the dash. Sent from my iPhone using Tapatalk

Your throttle cable is too tight causing the TORS to kick in and kill the engine. There is a rubber boot zip tied to the handlebar riser under that is where to adjust the throttle cable. Just loosen it a couple times and it should fix it. Sent from my iPhone using Tapatalk

I've ran innovate mtxs this short winter on my hurricane kit. Nothing bad to say about them. Always turn on and super easy to read. Here's my setup and I just wired them to the 12v plug and put the quick connecters next to the factory hood connector so everything is right there when I take the...