Search results

A Are you guys running the stage 6 cams also? I’m told this is a phenomenon of the stage6 cams and gap turbo with high flow muffler. The stock muffler would fix the issue I am told but I would rather run my 3 inch high flow.

I believe so yes. Hp is around the 400 mark

I read on this forum thst the valve clearance increases when warm, but I can’t verify this. No I did not check for warpage but in hindsight should have.

I did get 2 springs but installed only 1 for a 8psi crack pressure. With both springs installed the gate would barely move until like 17 psi and I felt this is too high but was told it was correct. (I have removed the internal gate and am going to external gate for Better boost control) Makes...

I am running td super high boost arp studs and the td HD head gasket. The gasket removed from the sled visually looks ok. If the head gasket went wouldn’t I see coolant in that piston ?

You can use a zip tie strategically to hold the line on. The zip goes in place of the clip

Logs

Hello all, is anyone running the TD large Gap turbo with all supporting mods ? (Cams, tapp clutch, injectors, header, intercooler, gap flasher, closed loop, etc). -anyone know what the target AFR should be on these ? How lean is too lean? I have attached some screenshots of my datalogs. -has...