Search results

Folks, I recently bought a Twin Turbo 2001 ZO6 Corvette, and although the car was cleanly built, my wideband was showing the AF ratios to be erratic, and on the lean side in general. The previous builder/tuner was VERY rude with me, and was not willing to help me at ALL. Living in the middle...

What is the going rate for a Turbo RX1? I want to get 6K for my 03 RX1ER with a Bender stage 2 kit. Other mods include camoplast track w/studs, anti ratchet drivers, pioneer front springs, billet carb caps, bender turbo clutch... Am I off my rocker thinking that I can get 6k for this...

I've posted up my 03 RX1 Turbo for sale and have gotten NO interest.. RX1 ER 3200 miles Bender Stage 2 turbo w/upgrades (oil, air filter) Billet carb caps Billet T's Pioneer front springs Camoplast 1" track with 192 studs Whal extrovert drivers Autometer boost gauge. Tuned on a...

Just wanted to let you guys know that I am very pleased to report that after my first ride of the year I can definitly feel a diffrence from running the air filter out the back of the sled vs under the seat (Bender kit)!!! T

Folks, last season on AVGAS I ran 11 psi and never saw this.. This year, I've set the boost to 12 psi and AVGAS. The only other mods is I have ran the air intake out the back of the sled (vs. under the seat) and jetted down 2.5 sizes on the main jets. The field that I am playing in is so...

Folks, we have one spot open for riding out of Shawinigan on this upcoming Monday. Please give me a call at 518 586 6766 if interested in tagging along! T

This year on my Bender II RX1, my idle A/F ratio seems to be very lean (somewhere around 18/1), although from the VERY limited riding I have been able to the WOT a/f ratio seems to be fine-not sure about the midrange. I have number 15 pilot jets in the carbs and 132.5 main jets. I do have the...

It seems like we are answering some of the same questions over and over latley. Maybe if we made a sticky stating the minimums that we agree on (billet T's, wideband, boost gauge, etc) it could prevent some of the clutter that redundant questions bring? T

Folks, I am currently completing the float bowl upgrade. Including in the kit is a jet extension, along with 2 o-rings. Oviously one o-ring goes around the base of the extension (in the same manner as the original), but I have no idea where the other oring would go? Any ideas? The fatter...

Last year my sled ran at right around 10.9/1 AF ratio with the stock main jets (135) and number 15 pilots. With everything else the same, what do you guys think i'd get for a change if I drop the main's one size (next down is 132.5). The pitot system on the Bender kit only provides the finest...

Bender stage 2 kit here w/stock motor (single headgasket). Just curious how much boost you guys have run on AVGAS without any problems. I'm asking because i've all but forgotten what I ran last year-but I am pretty sure it was right around 11-11.5 psi and had no problems. Held it to the bar for...

If you guys are using a good wideband with a serviceable sensor-a 11/1 AF ratio@WOT is safe, regardless of the fuel in the tank. It seems like a lot of you guys are wanting to run things on the ragged edge to gain a few horsepower, weather it be max boost on the minumum octane, or the leanest...

Can anyone give me a maximum tension the track should be run at before signifigant speed loss starts? I want to set mine there and go from there to cure my high speed ratcheting problem. Thanks!

I bought some Woody's last year but they wouldent fit... I'd like to get the longest possible for the stock skis (192 studs). Anyone? Thanks T

http://www.fjoracing.com/index.php Top of the page...I know it's a little extreme, but the snowmobiling envrionment is much thougher then most of these peices are designed for. T

I remember that before my last ride last year, I had noticed a groove worn down the center of one of the slides.I Could not get a replacement in time, so I just left it. Any ideas what would of caused this wear? Travis

Honestly, I thought my sled would feel faster then it does after the turbo install. Granted, the sled beats most anything I come across, but I guess after driving turbo cars for year it dosent feel all that fast. What is the seat of the pants gain with that last 4psi? T

Anyone have this since Bender sold out? T

I polished my tunnel last year...not making that same mistake this year as polished aluminum and snow do not mix well. I hit the tunnel up with a few SOS pads this year, and it looks halfway decent. Any better ideas for a quick cleaning? Also, last year the valve cover looked like absolute...

Kevin, is this part still available? Sorry for the small picture. http://images.amazon.com/images/P/B0006FR0EI.01-A2EA6Z40TP06NC._SCMZZZZZZZ_.jpg