Search results

We had planned on leaving for Laramie Thurs. Looks to be lacking snow most everywhere I call and access a web cam.Was hoping to ride some Mnt hills,bowls, and medows. All non-boosted sleds with much off-tail experience. I've looked at quite a few web-cams but nothing looks to be much better...

Does anyone know for sure if the 08' MTX fuel map..is identical to the fuel mapping of a Shortie Nytro built for low elevations?

I ended up with 2- M-8 take-off tracks. One is listed in the Yamaha Parts. SOLD!!!!!!!

My MTX pretty much stock other than a R1 Ti undermount (no boost) with 1400 miles. The noise has to do with being under load. It sounds like its traveling across the engine from PTO to Mag, at 40-50mph + it is especially noticable, the vibration travels up into the handle bars. On a warm up...

Does anyone by chance know if the Apex Mnt rear springs are interchangable with my MTX springs? If so are the Apex Mnt a stiffer rate? Lastly if anyone has a set for sale please PM me! Thanks in advance!

I think I read somewhere the the Apex Mnt rear torsion springs are a stiffer rate than those of the OEM MTX. My OEM's seemed to take a serious set this season, won't hold up the rear at all. Also I can bottom the suspension by simply pushing down on the rear bumper. I have all the suspension...

Looking to buy a hi-jacker...which one do you like the best, and where to purchase?

I found a bunch so far, but can't seem to locate the tail-light fuse. Thanks in advance! :drink:

What is the K&N oil filter PN# for the 3 cly MTX motor. Just got jabbed for the last time for $16.95 from Yamaha......Thanks

Has anyone found a "Quiet Solution" for an undertunnel system?

I had an appointment to take my 08' MTX to the dealer next week. Plan ! was to have all the front a-arm bushings and upper and lower balljoints replaced. Yamaha agreed that these repairs would be covered under warranty. I got a call this morning from my dealers service manager, he stated that...

Ok, what do you guys and gals feel is the best fit for a stock 153" MTX? I have to ride on some hard pack now and then as well, so I'm not looking for pure POW Performance as a whole.....Thanks. ( I did a search, but thought that getting all the info under one thread would be helpful to many)

I'm using my MTX as a crossover sled. I'd like to eliminate some major body roll. I have tightened up the front springs to max and pulled up the limiter straps 2-holes. It's better but still really dips when rocking from board to board. I know this is a good thing in the deep...but as I said I'm...

I have to get rid of this darting and huge keel hook'in. Hoping for some positive feedback on the Original Simmons (6"). Tried out a set of Slydog Powderhouds....may have gave up on them too soon, but experienced major push in loose snow off-trail. I'd like to end up somewhere inbetween the OEM...

Looking at the K-mod or doing an EZRyde. I'm looking for an much improved ride in the moguls, with less bottoming, but I don't want to give up any reliablity. Any and all comments appreciated!

When I picked up my sled I also bought six new filters. My dealer gave me the 5GH 13400-20 ( long ) Apex style. I realize that the 3 cly motor comes with the shorter 5DM 13440-00 style. It looks as if there is enough room for the longer type. Need to know if they are interchangable, and is the...

So are most of you running the limiters at full length posistioning or snuging them up? Mine came set at Max length from the dealer. I'm getting a lot of inside ski lift on hardpack. Also front end seems very twitchy ie: likes to hook and dive on hardpack conditions with stock skis.

Well I have about a hundred miles on the MTX now. Right from the get go I bolted up a pair of SlyDog PH's. The sled is very slow to respond to direction changes. "pushes". I have increased the rear springs to High tension along with cranking up the front skid shock to help in the bumps. I also...

I'm doing an oil change on an 06' 3cyl Rage. I have changed the filter, drained the sump, drained the crankcase, and cleaned the screen. How much oil in "Quarts" should I have to replenish the system with? I did a search but did not find a clear answer. Thanks in advance.

Well we got about 5" overnight. After all my have too's were completed this morning I got a chance to take out the MTX for a short 8 mile shakedown through the woods and in a couple of open feilds. This is way too early for positive impressions but here is what I noticed: Power feels good and...