Search results

Just in case you have never done this before. https://totallyamaha.com/snowmobiles/aaTECH/SyncingCarbsRX-1.htm

One more thing to do. If you can get use of a carb syn tool; syn the carbs. The 4 cylinders are really touchy in this aspect.

Rpex-1 : This is a post that may interest you. http://ty4stroke.com/threads/problem-with-bender-turbo.25515/ If you get some time, do a search under turbo section. Just put in' Bender ' under search. Lots of old stuff, but may help you get a better feel for the turbo. Some of the guys on here...

I see what you are saying. But can you Block off the factory pumps, and run only the electric pump ? Disconnect the hobbs switch, and see if the sled runs better on only the electric pump. My sled will run 50-60 mph at almost no boost. Just wondering if there is some sort of problem when the...

I think I'm missing something. When you say "pulse pumps", do you mean the two factory fuel pumps?On my Bender Stage 2, the stock pumps are blocked off. Run only the electric pump. I always thought the two kits were very similar. Turbos are on opposite sides, but set up is similar. Sorry if I'm...

Easiest starting point: Take off the inner cooler and look for oil. If the inner cooler has oil then the charge tube probably has oil also. Disconnect the charge tube back at the turbo. Use a rag and compressed air to push oil out the front of charge tube. Use rag at front of charge tube...

How many do you need?

Are you talking about the pipes that attach to the engine?

I've used the rivets from OFT Racing. About half the price of the ones from Yamaha. Used for both of my ZX2 installations. http://oftracing.com/OnlineStore15/index.php?main_page=index&cPath=37

Yammy: go to this page and look at my pictures, and see if they look like yours. Read the response from grizztracks http://www.ty4stroke.com/threads/cam-chain-tensioner-replacement-3-cylinder-engine-05-07.90826/page-5

There is an article in American Snowmobiler spring 2015. It is under the Tech notes section by Olav Aaen. Fox QS3

There is an article in American Snowmobiler spring 2015. It is under the Tech notes section by Olav Aaen.

I'm considering replacing the 06 Vector Gt with a SRViper R-TX Se . I like the piggy back front and rear coil over shocks. I've never ridden a Viper and just wonder how they compare to the r-motion. Spent a week in the UP in February and rode with 2 , 2015 Doo's. One Ace 900 and a 800 etec...

Just got back from the UP and my zx2 was acting like a pogo stick. This is in my 06 Vector Gt. Had the front shocks freshened by Pioneer before this winter. The zx2 shocks were redone by ad bovin approx 2800 miles ago. This sled has the two stage shock springs. I have them set on the 3rd...

How many hoses do you have going to the back of the carbs? Originally on the Bender kit there was one hose going from the inner cooler to the 2 back pairs of carbs. Some of us changed that to 2 hoses going to the backs of the carbs. One hose to each pair of carbs. If you have one hose going to...

I would try and find billet T's. Most guys had problems with the stock plastic ones. I've had good luck with the AEM wideband A/f gauge. Sensors don't last real long with racing gas mix. As long as you have the plastic T's are they glued good?

rxrider had a complete post on his mcx turbo, but I can't seem to find it. Maybe he will see your question.

How much boost are you running? I would put all the carb settings to stock. One thing to check is the tension on the waste gate rod. Mine did the same thing early on. You want a little tension on the rod so the waste gate doesn't flutter. I have a Bender Stage 2 but it is very similar to your...

Contact Hurricane Performance and Full Power Performance. They probably can help you.

This post may get you started: http://www.ty4stroke.com/threads/cat-skid-swap-tsl-ett-t-cat-121.78806/#post-710161