Search results

Looks like it was corrosion at the starter solenoid. Went to remove fuse and the solenoid broke into pieces Installed new one and fuel pump cycles with new relays in

Thanks for your help. I’ll check out the wiring

I did. I’ve tried two brand new SSR’s. It cycled and started the first try with new SSR in place. After 30 seconds sled shut off with no codes flashing. Tried to restart sled and got code 43 again and no start. I’ve followed this and other threads about this issue and have tried just about...

Will only changing out 2 of the three cause the problem I described. I changed the fuel pump and the load control with the the new relays. I wanted to make sure it was working so I left the fan relay alone. That is when I noticed the pump wouldn’t cycle and sled wouldn’t start and would flash...

I got a 2010 nytro with the code 43. Has happened intermittently since mid novenber. I just tried swapping out with the new all red solid state relays. Part number 8gn-81950-00-00. After the swap I am still getting code 43. I have since swapped the solid state relay to the load control and...

Tightened the throttle cable a bit, seems to have done the trick for now anyways. Hose didn't appear to be clogged

i'll take a look tonight or in the morning after work. Also no codes showing up

Wouldn't that effect the initial idle as well. Like I said only happens after driving, startup everything appears to run normal. I'm also wondering if it could be a spark plug issue. Thanks for responding

Having some trouble with my 2010 nytro mtx. It starts and idles fine and runs strong after initial warmup. My trouble is when after riding any amount of time or distance the sled stalls out as soon as i let off the throttle and it returns to idle. I've bypassed TORS to eliminate that from...