Search results

just bought an rx1 and couldnt believe how bad that vibration through the bars is, so I tried a couple things I learned in video and it reduced that vibration alot, here is What I did.

so I noticed I had buzzing hands after long rides on my newly acquired rx1, here is how I solved that problem.

I installed a Reverse gear kit on my recently purchased Rx1 and did a video on it since there were no video showing how to do it that I could find. The only thing I missed in the video was installation of the lever mechanism which is 3 bolts. but all the hard stuff about the gear case assembly...

had a similar issue with mine, this is what I did.

when I bought this sled a few weeks ago it was firing on all four up until about 30% throttle then a cylinder would cut out. It felt like spark blow out so I went after the Arcing coil problem but it turned out to be gummed up carb, so I cleaned the carbs and that sorted out the problem.

I installed a custom primer kit to my sled to help it start fast and easy when its colder than -20. Got the idea from my old skidoo mxz that has no choke, only a primer, 3 shots and 1 pull and it was going. Though I would copy that idea on to my Rx1 since I noticed it does not like to start easy...

mine had the same issue colder than -20c. I bought this sled and it had spark problems along with gummed up carbs, I fixed the spark problem and cleaned the carb, sled runs great but does not like cold starts, I had a choice to make, either modify to fix the issue or park it inside. I chose to...