Search results

hi.do you have the 2024 technical update.lots of good info.thanks

your autotune will only ajust the map you put afr on it.only do pressure it will be more stable.

have you tried the map.my sled is for trail riding and it is good on gas.it does the same range as a stock apex at trail speed.if you hammerd it ,it will take more fuel.it is way better than the mpi controller.

there s small changes.but the map may not load because the 2011 pc5 version is different than the 2006 to 2010.but you can copy the pressure map on it.to make it work.il send you my personal map.

hi ,i have my own map for a supercharged apex 2006.my map is made with the boost signal comes from the trothle body and cylinder not the intercooler.post your map,i can insert the pressure map on it and send it back

we will know when the part number, is new.by the looks of it,it seems to be thinner coating,maybe a harder inner bushing.

it supossed to be a new material.only time will tell.

2022 sidewinder comes with a new upper shaft,,harder and new gear bushing,,,found this image.it s in french,but it says new upper and lower shaft hardness and new top bushing,(maybe steel bushing,because of harder shaft,or needle bearing).we experimented with needle bearing,and so far the best...

how much retard timming are you guys putting with boost.

the 2006 and 2010 pcv ignition does fit .you have to change the connection to match the 2011 2016.

The arctic cat effect :)

plug color how are your plugs look like,are they all the same color or is there one with a lot of carbon on it.it will tell you witch cylinder is burning oil.another thing you could look at, is your exhaust port in the cylinder head for oil leaks from the valves.check your intercooler (turbo...

any of you guys changed your intank fuel pump for a better one.i have a supercharge apex and want to upgrade my fuel pump.my fuel pump is max out.i run at sea level,and i want to know if anyone knows wich fuel pump would fit in the place of the old one.any info or partnumber for the fuel pump...

thank you DC5

my trail supercharger apex has no studs on it.when there s pack snow on the trails it a blast to ride.you only have to watch for those icy patches.

there must be somebody here in this forum that has the instruction in pdf format.it will really help me.bender stageII turbo installation instruction. thanks. denisyamaha@hotmail.com

just bought a rx1 turbo can someone please send me the installation instructions for a bender stageII turbo for a rx1. and any tunning info. email: denisyamaha@hotmail.com thanks.

your seal may not be center to your shaft.we change a lot of clutch housing.the casing where the seal is not machined center to the primary shaft. hope this will help you

you should check or regrease your drive shaft speedo side bearing.these are a weak link on yamaha.

when you mod your intke or exhaust the efi on the apex has a tendency to lean the mixture,so you have to give it more fuel.or you will loose acceleration and top end power.