Search results

Donuts were changed as well as both y pipes. Gas is fresh. Taking it out this weekend. I'll update with how it starts. Thanks for the, replies.

Picked up a nice clean 2007 Attack. 10K miles. Previous owned changed the donuts and plugs for this season and then sold it o me. My issue is when it sits for more than a day when I cold start it it will crank for about 6 seconds, then start, got to crack the throttle some times. Put a new...

Tim, Thank You.

Picked up a 14 ZR 7000 last week as my doo quit on a long trip. Bought it in Canada and I live in the states. I want to change it to MPH if possible. Anyone know how to do this if possible? Thanks, Marco

Anybody have, or know where I can get a hold of front mount turbo install instructions for a 2006 - 2010 APEX? Powderlites, Simpn CPR, Alpine? anything would help. Thanks, Marco

I've got a good used CPR plastic cutout tank. Pm me

Thanks for the link. Tied up for the next day or so but I'll gt to it this weekend. I'll report back with how it comes out.

nate007, Once it starts it high idles fine. 2000 RPM or so then settles to around 1300 - 1400. I'll get a look at everything. on the air side. I don't think it is a bad valve.

DooAssassin I think that the fix. I was told that there was a way to richen up the entire base curve. Then I could readjust my numbrs down. Watched the video. It looks like he shows 4 settings and runs them up and down. Do you know which one I need to adjust and what is the range? Are...

kinger, Cold start issue is I must start the sled at least 3 times before it stays running. I could go out right now (about 80 degrees here) and it will start and stall at least twice. On the third try it should stay running and idle fine. This gets amplified when it's cold out. When it's...

That sounds great! I'll drop Mr. Sled a PM. Did you have the cold start issue with the GEMS and did this cure it?

FLYBYU How difficult was it for you? Literature states plug it in and away you go, no tuning. True? Do you set target A/F ration and that's it?

Got an 07 APEX with a Stage 1 MPI supercharger on it. Having cold start issues (starting 3 - 4 times before it stays running). I have been told that the controller I got from MPI can only add fuel to the idle circuit after it has been powered up. Looking for better cold starts. I've used the...

40 Degrees out this morning. Stalled once. Concerned that when it's like -20 that it won't start. I'll be playing with the blow off valve. The motor is defineately seeing more air than stock. Blow off valve is closed at idle but starts dumping around 2800 RPM. I believe if it's dumping at...

Just installed an MPI Stage 1 blower kit. Brand new from MPI. GEMS controller installed and idle setting at 3. When I cold start at 30 degrees or less it takes 3 - 4 times before it idles on its own. It's lean for sure. I keep adding fuel at idle but still not taking care of it. Anone have...

Man! Why didn't I think of that! Will Do. I'll get a different set of pulleys and Crank her up!..............still need to worry about the hammer heads and even my kids. Might try the screen idea. I thought I remember seeing a picture of someone using a stock airbox lid somehow glued to the...

Got a Stage 1 MPI S/C in my 07 Apex. Intercooler might as well have neon lights! Looks good but too much exposed. Worried about getting ice chunks thrown at it and damaging the intercooler. What have you used? Pictures would be great. Thanks for sharing! Marco

boost gauge is probably optomistic.

Perfect! Thank You, time to get the mig out! Marco

Thanks guys. Any pics floating around there? Figure I'll go up the right side. Sound right?