MarkRTX
Expert
Was riding the County this week and on long long runs I only pull 10200 to 100400 at the most I have the D&F weights Do I need to pull some weight out and where? By the way raced a 09 turbo cat both fromn stand still and roll ons and beat him all the way up to a 100 or so then he pulls me roughly up to a 1000 ft or little more I would say maybe even more than that but I saw 109 gps and him 111 gps so not to far off. Raced 09 800r XP not even a race as far as I'm comcerned with all the hype Thanks for any help Mark
yox185
TY 4 Stroke Master
Turk
Tech Advisor
What is your set up right now?
You gotta give me that!
You gotta give me that!
MarkRTX
Expert
I'll have to check to be positive but started with your setup Turk and was slightly modified with yours and Woodysattack I'll do some research to get the exact setup Thanks Mark
MarkRTX
Expert
My setup is as follows D&F shoulder 4.2 mid 4.2 tip 5.2and OD empty rpms fall off to about 10200 to 10300 or so at long run at WOT thanks for all help Mark
Len Todd
TY 4 Stroke God
Tpyically, to tweek top end RPMs up, take weight off the tips. Turk can probably even calculate it for ya. But, he may even have another idea for ya too.
The Bismarck
Extreme
Take one washer out of the tip
ericmichael
Expert
it could be a couple diffrent things..need more info about whats in there and where. Prob have to take weight off the tip ..provided theres any in there??
