Enclosed trailer question

[schmeg]

I know this is off topic, but this forum is usually where I reside and figured this question would get answered here quickest.
I'm looking at a 6.5x12 Thule enclosed trailer that is specifically built for bikes. I know I would need to install mats and guides, but my only concern is can I get an Apex with a 136" track and an RS Venture with a 144 in the trailer obviously in a staggered fashion? I would like a bike trailer because I want to trailer the Harley in the off season and deck height on the trailer is lower than a sled trailer. Thanks Jay.

 

[APEX 06]

That would be hard to get them in. I think it would be easy with a 16 foot.

 

[ahicks]

That would be hard to get them in. I think it would be easy with a 16 foot.

Right. I know a 16 works, without having to turn one around. You just have to pull the back of the front machine hard over to the side.

I think you're going to be looking for a very large shoe horn to get them both in a 12'.

 

[YAttak07]

Maybe you could take some tape and layout the 6.5 x 12 on the floor and see if you can "comfortably" get your two sleds to fit in that space.

 

[APEX 06]

Maybe you could take some tape and layout the 6.5 x 12 on the floor and see if you can "comfortably" get your two sleds to fit in that space.

Good thinking

 

[schmeg]

Why didn't I think of that. I know a 7x12 will work fine. It is a v nose with no front door, so you have an extra 3 feet to work with in the v to offset the sleds.

 

[THKSNOW]

I think you would regret it. Sounds like a pain in the azz loading and unloading... (IMHO)

 

[lawmanbsi]

Before I bought my trailer. snapped chaulk lines to the size of the trailer. It was easy to move sled around

 

[schmeg]

Found a 16 foot Blizzard inline second hand I put an offer on. Nice looking trailer. Should do the trick.