How will I do on the sno pack lake???

[radta7]

Going with my work buddies and will be racing a 2008 F1000 with can, clutch, pipe and boondocker kit. also running a 2007 F7 with pics, clutch, can.

My 06 attak has: Ulmer stage 2, ulmer airbox, cobra track, windage plate.

My dreamometer usually reads 121-125 pending conditions.

We'll race, but I am trying to see how I do. I am getting all the usual yama-ton, and 4 strokes are for slow pokes sh!$. The 1000 usually beats the F7.

Thanks!

 

[Yummy]

You should be good for 110 gps. I don't think you can get a well tune f1000 but you should be able to get the F7.

Good luck!

 

[wileya]

i recently put and ulmer stage II kit on my sled and haven't had it out since i put in on... but my 09 RTX stock would eat up 2 F1000's one of them has a clutch kit in it, and a rev 800. came out of the hole even and started walking away! this was also on hard pack, i have noticed that with my ripsaw track if there is anymore then 1 inch of soft stuff i don't really do much of anything. all machines studded. hope this helps.

 

[Dano]

Its a real crap shoot with cats. Some owners know how to make them go and some simply don't. I've seen "some" f-7s go like stink so I wouldn't rule it out. If the F-7 has advanced timing, race him the whole length of the lake till he pops! lol
The 1000 will probably be a hand full, but who knows.

Dan

 

[Primetime]

Beat the ditch pickels

 

[xracer]

If you race on a trail or lose snow from a dead start you won't have a problem

 

[radta7]

I beat a ski 1000 that was supposed to have 172HP. Mid range we were together but I would consistantly walk him on top. This cat should be a good run.

 

[radta7]

OK, update. Raced the F7 on the lake and beat him all the way and pulled in on the top on the lake.

the 1000 looked real fast on Saturday and seemed to pull hard. As we cut out on the lake he opened it up and seemed to go real fast right to where it shut down and blew a piston. We never got to race...

I think he would have beat me though. I may have more top end though based on talking to him afterwards. Someone above called it. Boondocker kit was set too lean for him. Ouch. I need a yama charger or a 2011 XTX