mtn lite track extension?

[jp@weknowsnow]

possible? i'd like to extend the track on my mtn lite to 151 or 153 or 155 if possible.. anyone heard of any kits?

are 14x151x2 even available?

 

[LazyBastard]

Tracks usa shows 9047M as a 9040M cut down to 14". Its Challenger 2.313"

 

[jp@weknowsnow]

alright! thanks, there is hope.. anyone make a track/rail extension kit?

btw, this weekend my mountain lite got me to the top of this:

(rider: JP photo: Kya)

and this:

(rider: reidhresko photo: iskibc)

 

[Phazed-Coug]

JP... you need to drop the phazer off those...

 

[Vmax4]

JP,

I want to long track my 07 FX, and was planning on buying a 144x14x2. Wondering if you were going to stretch, if we could do some bartering?? I would need a track and other assorted goodies...........

Lets talk,
Steve

 

[rfabro]

JP... you need to drop the phazer off those...

I'd say the same, but the stock shocks can't even handle a small bump. I ordered that 151 yesterday, and am getting the turbo today or tomorrow. Before I mount them, I'm gonna spend a few days dialing my new shocks, which are pic'd in my avatar now. I bet those will do well off cliffs! Nice pics as always, JP. Tracks USA has extensions for you- $40 off with a track- but I think I took the last two tracks from their stock. When I asked for the second one they said they were out and had to factory order. Then they found one more. I will be ready for Colorado pretty soon. Good luck.

 

[gabe7924]

JP, talk to Kevin at Hi Point Motorsports in Glenwood Springs. They put a 151,2.25 paddle on their Phazer. I would not recommend it unless you are going to turbo it though.

 

[Elevator Ryder]

JP... you need to drop the phazer off those...

I'd say the same, but the stock shocks can't even handle a small bump. I ordered that 151 yesterday, and am getting the turbo today or tomorrow. Before I mount them, I'm gonna spend a few days dialing my new shocks, which are pic'd in my avatar now. I bet those will do well off cliffs! Nice pics as always, JP. Tracks USA has extensions for you- $40 off with a track- but I think I took the last two tracks from their stock. When I asked for the second one they said they were out and had to factory order. Then they found one more. I will be ready for Colorado pretty soon. Good luck.

What brand are those shocks in your avator. Ive been looking into a new set for my phazer.

 

[rfabro]

Those are Custom Axis- made by Penske. I ordered them at Hygear and so far they are awesome. I took the sway bar off so the sled really wanted to roll, so I will be putting that back on before my next ride. On straight bumps they soaked up everything I could throw at them and more. When I get them dialed I think they will be the shite. They better be-- they were $3200!