Powderat
Newbie
- Joined
- Jan 28, 2006
- Messages
- 1
- Reaction score
- 0
- Points
- 481
Buddy bought an 08' Nitro MTX with 500 miles. After riding it I noticed it was engaging pretty high. Pulled the outside cover and noticed some hand written specs on the clutch cover. The previous owner has made changes to the clutching and gearing. Can I lower the engagement by changing the BL/BR/BL back to the stock G/W/G primary spring. This sled was bought to break trails into a remote cabin and will be occasionally towing in small sleds. It's just to touchy at slow speeds. Also they went up 2 gears from stock according to the TYTech section stock specs. The secondary is all stock and was never touched. We ride at 0-2000 ft. Thanks
